12 | 3Com Router 5000/6000 Family |
| Command Reference |
ca identifier
Use the ca identifier command to specify the CA this device trusts and have the "name" CA bound with this device.
PKI Domain view
cable
Use the cable command to set the cable length matching the CE1/PRI interface.
CE1/PRI Interface view
cable
Use the cable command to set the cable length of the ATM E1 interface.
ATM E1/T1 Interface view
cable
Use the cable command to configure the cable mode of ATM T3 cable, i.e., to set the distance between the router and the cable distribution frame.
ATM T3 Interface view
cable (CT1/PRI Interface)
Use the cable command to set cable attenuation and length on a CT1/PRI interface to match the distance of the transmission line.
CT1/PRI Interface view
cable (CT3 Interface)
Use the cable command to configure the length of the cable with which a CT3 interface is connected.
CT3 Interface view
Use the
MSDP view
Use the
Voice Entity view
callednumber
Use the callednumber
Voice Access-Number view
Use the
Voice Entity view
car
Use the car command to configure traffic monitoring for a behavior.
Traffic Behavior view
Use the
Voice Access-Number view
cas
Use the cas command to enter the R2 CAS view and digital E&M Signaling view.
CE1/PRI Interface view
cbs
Use the cbs command to set the committed burst size of frame relay virtual circuit.
Frame Relay Class view
ccc interface
Use the ccc interface
System view
ccc interface
Use the ccc interface
System view
cd
Use the cd command to change the current path on the SFTP server. If you do not specify the
