![](/images/new-backgrounds/1299218/299218243x1.webp)
122 | 3Com Router 5000/6000 Family |
| Command Reference |
reflector
Use the reflector
BGP Unicast view
BGP Multicast view
VPNv4 view
refresh bgp
Use the refresh bgp command to request the peer to retransmit routes or retransmit routes to the peer.
User view
Use the
SIP Client view
register lifetime
Use the register lifetime command to configure the registration lifetime of an MR.
MR view
Use the
Voice Entity view
Use the
PIM view
register retransmit
Use the register retransmit command to configure the registration retransmission parameters of an MR, including the initial registration retransmission interval, the maximum registration retransmission interval, and the maximum number of registration retransmission attempts.
MR view
Use the
R2 CAS view
registrar
Use the registrar command to configure the IP address or domain name, port number, timeout time as well as master/slave attribute of the registration server under UAs.
SIP Client view
remark atmclp
Use the remark atmclp command to have the system remark the CLP bit of ATM packets in the class.
Traffic Behavior view
remark dot1p
Use the remark dot1p command to configure the 802.1p priority value in the VLAN packets of a class.
Traffic Behavior view
remark dsc
Use the remark dscp command to set a remarked DSCP value for IP packets belonging to the class.
Traffic Behavior view
remark
Use the remark
Traffic Behavior view
remark
Use the remark
Traffic Behavior view
remark
Use the remark
Traffic Behavior view
Use the
IKE-Peer view
remote address
Use the remote address command to configure to assign IP address for the peer interface.