Raymarine Raychart Chartplotter RC530 PLUS manual Customizing the Screen Presentation Options

Chapter 2: Getting Started & Adjusting the Display 2-13

Customizing the Screen Presentation Options

The SCREEN soft key lets you set the following screen presentation options on or off:

Radar:

SCREEN

CRSR		BOX	RNGE RNGS DATABOXES					WAYPOINT
		ON			ON	OFF				ON
	OFF			OFF			ON		OFF

D3643-2

Chart:

CRSR	BOX	CHRT GRID DATABOXES				CUSTOM
OFF	ON	OFF	ON	OFF	ON	OFF	ON

D4177-1

Switching the Cursor Data Box On and Off

The cursor data box provides the cursor’s position in latitude/longitude and/or bearing/range. If you wish to see a full image, you can switch the data box off.

➤To control the cursor data box:

			1.	Press the SCREEN soft key.
SCREEN
			2.	Press the CRSR BOX soft key to toggle the setting from OFF to ON or from ON
CRSR		BOX		to OFF.
	OFF	ON

3. To return to the default soft key display, press ENTER.

➤You can move the cursor data box using the context-sensitive cursor.

Switching Radar Range Rings or Chart Grid On and Off

The radar range rings can be turned on or off. They are normally left on, but you may wish to turn them off if you are using VRM/EBLs or guard zones (see Section 3.4 and Section 3.5) to make the display clearer.

The Chartplotter display includes grid lines of latitude and longitude which you can use to help determine position on the chart. The grid lines can be switched on if required.

If you are in Chart mode the RNGE RNGS soft key is replaced by the CHRT GRID soft key.

➤To turn the range rings or chart grid on or off:

	1.	Press the SCREEN default soft key.
SCREEN
	2.	Press the RANGE RINGS or the CHRT GRID soft key to toggle the setting from

RNGE RNGS			OFF to ON or from ON to OFF.
	OFF	ON
			To return to the default soft key display, press ENTER.

Customizingthe		ScreenPresentation		Options
	Presentation
the
Customizing			Options
	Screen