Raymarine Raychart Chartplotter RC530 PLUS manual Switching Control Between Radar & Chart Screens

Chapter 2: Getting Started & Adjusting the Display 2-9

Radar:

DISPLAY		WINDOWS		SELECT
		OFF	ON	WINDOWS	ZOOM...
							D4208-2
	Chart:
DISPLAY		WINDOWS		SELECT	OVERLAY
		OFF	ON	WINDOWS		OFF	ON
							D5708_1

2.To select a different window, press either SELECT WINDOWS soft key until the required window is highlighted. If necessary, this will toggle windows on. Press ENTER.

3.To toggle windows off, press the WINDOWS OFF ON soft key.

Figure 2-6shows the half-screen horizontal windows (in radar mode).

Switching Control Between Radar & Chart Screens

In a combined or an integrated system, to switch control between radar and chart, you can change the full-screen mode using the DISPLAY key. Alternatively, when you have both radar and chart displayed in half-screen windows the soft key RDR CHRT lets you toggle operating control between the radar and the chart window.

If a window is active, i.e. control of the cursor via the trackpad is available in that window, and you switch windows off, control automatically returns to the full-screen (upper window) mode.

Radar:

HDG MODE TARGETS MORE¬ RDR CHRT

D5668_1

Chart:

ROUTE GOTO MORE¬ RDR CHRT

D4168-1

➤To change the active window, press the RDR CHRT soft key to toggle control between the radar and chart display. The current active display is highlighted in red on the RDR CHRT label and the cursor appears in that window.

Returning to the Full-Screen Display

To return to the full-screen display you can turn windows off, as previously described. Alternatively, to return to full-screen display:

➤Press and hold the DISPLAY key for 2 seconds to return to the currently

selected full-screen (upper window) display.

Mode
of
Mode		Operation
the
the	Operation
Selecting		of
Selecting

DISPLAY