Chapter 5: Standard Chart Operations

5-23

 

 

You can use a Navigator Keypad (see Using the ST60 or ST80 Navigator Keypad on page 5-15) to name the route.

5.Press ENTER to finish and clear the Name List, or press CLEAR to cancel the operation. To return to the default soft key display, press ENTER again.

Clearing the Current Route

 

 

You can clear the current route from the screen. When you select CLEAR ROUTE

 

 

if the current route has not been saved, you have the option of saving it and, if

 

 

you are following the current route, you have the option to stop.

 

 

To clear the current route:

 

 

1. Press the ROUTE default soft key or place the cursor over a route leg until

 

ROUTE

 

 

the text RTE is displayed.

 

RTE

Press the CLEAR ROUTE soft key.

 

 

2. If you are following the current route the STOP FOLLOW soft keys are dis-

 

STOP

played.

 

FOLLOW

 

 

To cancel the CLEAR operation press NO.

 

 

To stop following and clear the route press YES.

 

SAVE

3. If the route has not been saved the SAVE ROUTE soft keys are displayed.

 

ROUTE

To clear the route, without saving it in the route database, press NO.

 

 

 

 

To save the route in the database, press YES. The Name route soft keys are

 

 

displayed and you should continue as described in the previous section,

 

 

Saving the Current Route on page 5-22.

 

 

The current route is cleared from the screen and the default soft keys are

 

 

displayed. You can now use the ROUTE soft keys to make a route, or to show

 

 

another route from the database.

Retrieve a Route From the Database

You can select a route as the current route from the database list. The list is accessed from the second set of ROUTE soft keys.

To select a route as the current route:

 

 

1. Press the ROUTE soft key, followed by MORE, then press ROUTE LIST. The

 

ROUTE

 

SHOW

route list is displayed as illustrated in Figure 5-7. The selection bar indi-

 

cates the selected route.

 

ROUTE

Clearing the Current Route

2.Use the trackpad to select the required route then press the SHOW ROUTE soft key. The chart is re-drawn at a scale suitable to display the whole route.

Page 127
Image 127
Raymarine Combined Pathfinder Radar, RL80CRC PLUS manual Clearing the Current Route, Retrieve a Route From the Database