Raymarine Raychart Chartplotter RC530 PLUS, RL80CRC PLUS manual Placing a Waypoint

Chapter 5: Standard Chart Operations 5-9

• Moving a Waypoint

At the end is a section about using the ST60/80 Navigator Keypad to select, edit, and name your waypoints.

Placing a Waypoint

➤

MARKS

➤

PLACE WPT

AT CURSOR

PLACE WPT

AT VESSEL

➤

MARKS

WAYPOINT

LIST

MAKE NEW

WAYPOINT

The scenario Place and Goto a Waypoint on page 2-26 provides a simple example of how to place a waypoint.

To access the place waypoint soft keys, press MARKS:

PLACE WPT	PLACE WPT	WAYPOINT	LOAD/SAVE
AT CURSOR	AT VESSEL	LIST	USER CARD
			D41695572--11

To place a waypoint at the cursor position or at the vessel position:

1.Press either the PLACE WPT AT CURSOR or the PLACE WPT AT VESSEL soft key. The waypoint is added to the waypoint list and tagged using the next available number.

The waypoint soft keys are displayed until you move the cursor away from the waypoint or press CLEAR.

GOTO EDIT ERASE MOVE

WAYPOINT WAYPOINT WAYPOINT WAYPOINT

D4163-1

You can use the EDIT WAYPOINT soft key to name the waypoint as described in Editing Waypoints below.

2.Press CLEAR or ENTER to remove the place waypoint soft keys. To place a waypoint as latitude/longitude using the Waypoint List:

1.Press MARKS, followed by the WAYPOINT LIST soft key. The Waypoint List and associated soft keys are displayed.

2.Press the MAKE NEW WAYPOINT soft key followed by the LAT/LONG soft key; the WPT POSITION (LAT/LONG) screen is displayed, with it’s associated soft keys. The waypoint is placed at the current vessel position, or if not available, the cursor position.

Placing a Waypoint