Chapter 7: Setting Up the System Defaults

7-3

 

 

For parameters that have a numeric value, or more than four possible settings, a scroll list is displayed above two of the soft keys.

Some parameters are controlled by a slider that is displayed above two of the soft keys.

For some parameters, a soft key provides access to a sub-menu of fur- ther options.

4.Press the soft key corresponding to the desired setting or, for scroll lists, use the soft keys to scroll forwards or backwards through the list until the required setting is displayed. This setting is retained when you move the selection bar on to the next parameter in the menu list.

For sliders, press the appropriate soft key repeatedly to increase or decrease the slider value in individual steps, or press and hold the key to change the setting quickly.

5.Once you have set all the required values, press ENTER to clear the menu and return to the set up soft keys.

6.Press ENTER, MENU or CLEAR to clear the soft keys and return to the default display.

You can return all the settings to their original factory settings, if required, by performing a factory reset as described in Chapter 9.

Changing the Set Up Parameters

Page 161
Image 161
Raymarine Raychart Chartplotter RC530 PLUS, RL80CRC PLUS, Chartplotter RL70CRC PLUS manual Setting Up the System Defaults