Raymarine RL80CRC PLUS Changing the Set Up Parameters, Depend on the selected operating mode

Changing the Set Up Parameters

7-2 hsb2 PLUS Series Color LCD Display

7.2 Changing the Set Up Parameters

The set up parameters are divided into four sections:

•System, to control the aspects of the system that are not specific to the radar or chart.

•Radar, includes bearing alignment, display preferences and the timed transmission option.

•MARPA, to control the MARPA target tracking parameters, including tar- get vectors, safe zone and target history display.

•Advanced, to control specialist radar settings such as display timing, STC preset and tune preset (see Section 7.6 for instructions on how to access these functions).

•Chart, to control the chartplotter display, including waypoint information, vectors and radar/chart synchronization.

Note: The GPS and Track Set Up menus are described in Chapter 6.

This section provides instructions for displaying and changing the default values. The following sections list the parameters and their possible settings, and describe the function of each parameter in turn.

➤To set the default parameters:

MENU	1. Press the MENU key to display the set up soft keys - the options available
	depend on the selected operating mode.
	Radar
	SYSTEM	RADAR		MARPA
	SET UP¬	SET UP¬		SET UP¬
				D3640-3
	Chart
	SYSTEM	CHART	TRACK	GPS
	SET UP¬	SET UP¬	SET UP¬	SETUP¬
				D4162-1

2.Press the soft key for the set up you require.

The requested set up menu is displayed, listing the parameters and their current settings.

3.Use the trackpad to move the selection bar up and down the list. An arrow is displayed at the top or bottom right-hand corner if you can scroll the list to display further parameters.

As each line is highlighted, the soft keys are updated to show the settings available.