Raymarine Combined Pathfinder Radar, RL80CRC PLUS manual Using the ST60 or ST80 Navigator Keypad

Chapter 5: Standard Chart Operations 5-15

CAUTION:

Take care when editing waypoints as it is possible to move waypoints that are used in routes stored in the Route Database. In such instances, the stored route will include the waypoint in its new position.

➤To move a waypoint using the cursor:

1. Move the cursor over the waypoint, until the letters WPT are displayed. The

WPT

	waypoint soft keys are displayed.
MOVE	2. Press MOVE WAYPOINT, the cursor changes to a four-headed arrow.
WAYPOINT

3.Move the cursor to the required waypoint position.

Press ENTER to set the position and return to normal cursor control. Press CLEAR to cancel the operation.

➤To move a waypoint using the Waypoint Edit functions:

1.Select the waypoint using either the cursor or the waypoint list as described above. The waypoint soft keys are displayed.

2.To edit the waypoint position proceed as previously described in Editing the Waypoint Details on page 5-13.

Keypad

ST80 Navigator

Using the ST60 or

Using the ST60 or ST80 Navigator Keypad

If you have an ST60 or ST80 Navigator Keypad connected on SeaTalk it can be used to name or edit your waypoints, tracks, or routes on any display in the system. The keypad can also be used to select entries in the Waypoint List. The Navigator provides 10 dedicated alphanumeric keys, a multidirectional cursor control pad, plus Insert and Delete keys.

Note: When using the Navigator Keypad, you should be aware that it can con- trol several displays simultaneously; any display in edit mode (i.e. ready for alpha-numeric data entry) will be affected by the Navigator Keypad.

1	2	3
abc	def	ghi
4	5	6
jkl	mn	opq
7	8	9
rst	uvw	xyz
ins	0	del

NAVIGATOR

D1934-2

Figure 5-5: ST80 Navigator Keypad