Raymarine RL80CRC PLUS, Raychart Chartplotter RC530 PLUS Adding Waypoints at the End of the Route

Editing a Route

5-28 hsb2 PLUS Series Color LCD Display

Adding Waypoints at the End of the Route

➤To add waypoints at the end of the route:

	1.	Press the ROUTE soft key, followed by the EDIT ROUTE soft key.
ROUTE
		The Make Route soft keys are displayed and the cursor is connected to the
EDIT		last-placed waypoint with a dotted line. You can add further waypoints to
ROUTE
		the route in the same way as for a new route.
	2.	Either:
PLACE		i. Move the cursor to the required location, and press PLACE WAYPOINT
WAYPOINT
		soft key.
UNDO		If you place the waypoint in the wrong position, press the UNDO WAY-
		POINT soft key.
WAYPOINT
		Or
		ii. Press USE WPT LIST, the MAKE ROUTE pop-up is displayed.
		Select a waypoint from the Waypoint List then press the INSERT WAY-
		POINT soft key to place the waypoint at the end of the Route.
	3. Place as many waypoints as required, and press the ACCEPT ROUTE soft key,
ACCEPT		the default soft keys are displayed.
ROUTE

Note: You can UNDO waypoints in the original route, not just the new ones.

Removing a Waypoint from the Route

➤To remove a waypoint from the current route:

1. Move the cursor over the required waypoint until the letters WPT are dis-

WPT

played. The waypoint soft keys are displayed.

2. Press the REMOVE WAYPOINT soft key. The waypoint is removed from the

REMOVEroute and the route is re-numbered.

WAYPOINT

Alternatively, you can remove the last waypoint from a route by pressing the UNDO WAYPOINT soft key, as described above in Adding Waypoints at the End of the Route on page 5-28.

If the route has not been saved and the waypoint was placed as part of the route, the waypoint is erased.

If the route has been saved, or the waypoint existed before you created the route, the waypoint remains on the screen.