Raymarine RL80CRC PLUS Controlling VRM/EBL Data Boxes, Press the Float soft key, From on to OFF

Controlling VRM/EBL Data Boxes

3-18 hsb2 PLUS Series Color LCD Display

3.Alternatively, if you wish to move the floating VRM/EBL, press ENTER to take control of it and move it using the trackpad.

Press ENTER again to drop the VRM/EBL in its new position, or CLEAR to abandon the operation and return the VRM/EBL to its previous posi- tion.

➤To unfloat a floating VRM/EBL using the keys:

VRM/EBL	1.	Press VRM/EBL to display the VRM/EBL soft keys.
	2.	Press the FLOAT soft key.
FLOAT 1	3.	Press the UNF LOAT 1 soft key to unfloat VRM/EBL1, or the UNFLOAT 2 soft

key to unfloat VRM/EBL2.

UNFLOAT 1

The soft keys are cleared, and the VRM/EBL is repositioned with its ori- gin at your vessel’s position.

Controlling VRM/EBL Data Boxes

➤To move a VRM/EBL data box, using the context-sensitive cursor:

1. Move the cursor over the box until the letters BOX are displayed, and press

BOX

ENTER to take cursor control of the box.

2.Use the trackpad to move the box to its new location, and press ENTER to drop it and return to normal cursor operation.

Each VRM/EBL data box is switched on and off with its associated VRM/ EBL. However, when one or both VRM/EBLs are active, you can turn the data box(es) off at any time, if required.

➤To control the VRM/EBL data boxes:

VRM/EBL		1.	Press VRM/EBL to display the VRM/EBL soft keys.
VRM/EBL		2.	Press the VRM/EBL DATABOX soft key to toggle the setting from OFF to ON or
			from ON to OFF.
DATABOX
OFF	ON

Note: VRM/EBL data boxes are not affected by the setting of the DATABOXES soft key accessed using the SCREEN default soft key. This only controls the set of data boxes available for integrated systems (see Chapter 2).