Raymarine Chartplotter RL70CRC PLUS manual Measuring Range and Bearing Between Targets Float

Measuring Range and

Bearing Between

Targets (FLOAT)

3-16 hsb2 PLUS Series Color LCD Display

➤To move the VRM and/or EBL:

1.Move the cursor over the VRM or EBL you wish to change. If you wish to change the VRM and EBL together, move the cursor over the intersection of VRM/EBL. The cursor text indicates the current object as VRM, EBL, or VRM/EBL.

2.Press ENTER to take control of the object. The object(s) under control is displayed as a solid line, and the cursor as a four-headed arrow.

3.Move the EBL to the new angle and/or change the VRM radius (range) using the trackpad controls.

4.Press ENTER again to drop the VRM/EBL in its new position, or CLEAR to abandon the operation and return the VRM/EBL to its previous position. The radar shows the VRM/EBL as a short-dashed line (VRM/EBL1) or a long-dashed line (VRM/EBL2), and the cursor returns to normal control.

		Deleting an Existing VRM/EBL
VRM/EBL		➤ You can delete a VRM/EBL by using the VRM/EBL key to display the soft
		keys, and pressing the required VRM /EBL soft key to toggle the setting from ON
VRM/EBL1		to OFF.
OFF	ON

➤Alternatively, you can delete an existing VRM/EBL using the context- sensitive cursor. To do so:

1. Move the cursor over the VRM/EBL you wish to control, until the letters

VRM VRM, EBL, or VRM/EBL are displayed.

2.Press CLEAR.

This has the same effect as turning the VRM/EBL off using the VRM/EBL soft keys. It turns off the VRM/EBL pair, irrespective of the cursor text: you cannot turn off VRMs and EBLs independently.

Measuring Range and Bearing Between Targets (FLOAT)

You can measure the range and bearing between any two points on the radar, such as two targets, using the Pathfinder Plus Radar’s Float function. This allows you to move the origin of a VRM/EBL away from your vessel’s position and onto a target. You can then change the angle of the EBL, relative to its new origin, to obtain the bearing between two points. The radius of the VRM can also be adjusted to determine the distance between two points.

Floating a VRM/EBL

Note: You can float a VRM/EBL pair using either the soft keys or the context- sensitive cursor. The procedure for using the cursor is the same as for moving