Raymarine Combined Pathfinder Radar manual Removing a Chart Card, Displaying the Chart Data

Chapter 5: Standard Chart Operations 5-3

D4158-1 Removing a Chart Card

Figure 5-1: Removing the Chart Card

Removing a Chart Card

We recommend that before you remove a chart cartridge, you ensure the chart is not being used on any other display unit. Removing a chart cartridge whilst a display unit is accessing the chart may cause an operational error.

➤To remove a chart card:

1.Open the card cover, at the lower left of the display front panel.

2.Press on the card you wish to remove, and move the top of the card to the left to clear the retaining pegs.

The card will spring half-way out, enabling you to grip the card and remove it from the slot.

3.Remember to close the card cover so that it clicks shut, to prevent water from entering the card reader assembly.

Displaying the Chart Data

The new chart information will be displayed when you move the cursor into an area covered by the new chart or, if it is already in the area, change the range scale.

If an hsb2 series repeater display is connected, the chart can also be accessed by the repeater display. To see the chart you may need to zoom or pan, to redraw the chart area to the screen.