Manuals / Raymarine / Car Audio and Video / Car Video System

Raymarine RL80CRC PLUS manual Scanner Connection master displays, Radar Scanner Connection

Models: Raychart Chartplotter RC530 PLUS Combined Pathfinder Radar Chartplotter RL70CRC PLUS RL80CRC PLUS

1 248

Download 248 pages 49.49 Kb

Page 192

8-14	hsb2 PLUS Series Color LCD Display

Scanner Connection (master displays)

Connect the inter-unit cable plug to the rear scanner connector. If you are using an inter-unit extension cable, connect this to the display unit, and connect the supplied cable to the extension cable.

The scanner connector pins are shown in the following diagram, together with the connections and core colours.

Front view of

Display Cable Connector

2 1

53

4

86

7

119

10

13 12

Refer to Pathfinder Scanner Owner's Handbook for connector detail.

Display Unit Connection

Display

Video	White
	1
Video RTN	Black
	2
*Battery --ve	Black
	3
Tx Trigger +	Orange
	4
Battery --ve	Black
	5
Data I/O +	Green
	6
Tx Trigger --	Yellow
	7
	Shield
	8
Battery +ve	Red
	9
Data I/O --	Blue
	10
*Battery +ve	Red
	11
Azimuth +	Violet
	12
Azimuth --	Grey
	13

Scanner

			White	Video
		8		Video
			Black	Video Rtn
		7		Video Rtn
			Orange	Tx Trigger +
		6		Tx Trigger +
			Yellow	Tx Trigger --
		5		Tx Trigger --
			Green	Data I/O +
		4		Data I/O +
			Blue
			3	Data I/O --
			3	Data I/O --
			Violet
			2	Azimuth +
			2	Azimuth +
			Grey	Azimuth --
		1		Azimuth --
			Red	Battery +ve
				Battery +ve
			Red	*Battery +ve
				*Battery +ve
			Black	*Battery --ve
				*Battery --ve
			Black	Battery --ve
				Battery --ve
		Battery +ve/--ve = 12, 24 or 32v.

* Not present on 'light', 11 core cables.

D4290B-2

Figure 8-7: Radar Scanner Connection

The hsb2 cable is supplied with a blanking plug for the scanner connector socket. This should be attached to the repeater display. If the repeater display is installed in an exposed position seal the blanking plate with silicon compound.

Image 192

Raymarine RL80CRC PLUS, Raychart Chartplotter RC530 PLUS manual Scanner Connection master displays, Radar Scanner Connection

Contents

Distributed by Distributed by Hsb2 Plus Series Color LCD Display Page Hsb2 Series Color LCD Display Owner’s Handbook December Raymarine Limited Anchorage ParkPortsmouth Hampshire PO3 5TD England Telephone System Display Scanner Chartplotter PrefaceTFT LCD Displays Warranty EMC Conformance Contents Viii Standard Radar Operations Standard Chart Operations Integrated Radar Operations Further Chart Operations Going To an Individual Target Point Installation Chart Display -RL70/80CRC PLUS, RC530 PLUS, RC631 Plus Maintenance and Problem Solving Specification Using the Auxiliary Junction BoxMAP Chart Card Features Connecting a Raymarine Heading Sensor Xiv How to Use This Handbook Overview Howto Use This Handbook Fishfinder, chart or radar data TerminologyUnit capable of sourcing specific data such as High Speed Bus links compatible display units General Introduction to hsb2 SystemsDisplay Unit Scanner Features Plus Display Units Set Up Options Display Full-screen mode Half-screen Window OptionsOperating Modes Following are available Full Screen Operating Modes Full-screen mode Half-screen Window Options Multi-display systemsWindow Options for Integrated Systems Providing Heading Data for Radar/Chart Overlay and Marpa Details on connecting other equipment are given in ChapterHeading and Position Data Pathfinder Radar Plus Display Pathfinder Radar Plus Display Options 3nm Radar Functions 120@T 6.3kts 5.7kts14.4m Chartplotter Display Chartplotter Display Options Typical Chartplotter Display Chartplotter Functions Operating Controls Trackpad and Cursor Moving the Cursor Context-Sensitive Cursor ControlCursor is used to Select a position on the screen Dedicated Keys Soft Keys Pop-Up Menus Typical Pop-up Menu Database Lists Waypoint List Getting Started & Adjusting the Display IntroductionConventions Used Simulator Switching the Display On and Off Radar Mode Power key Chart Mode Switch Off Simulator Mode Switch Off Adjusting the Brightness Changing the Brightness Selecting the Mode of Operation Controlling the Display Using the Display Key Selecting a Half-Screen Window for Display Switching Control Between Radar & Chart Screens Returning to the Full-Screen Display Radar Half-Screen Window Options Getting Started Chartplotter Switching the Cursor Data Box On and Off Switching Radar Range Rings or Chart Grid On and OffCustomizing the Screen Presentation Options Waypoint Display Radar mode To switch the group of data boxes on or offData Boxes Cursor Custom Options Chart mode Screen To display the active waypoint Using the Zoom Function Radar Display Control FunctionsPress the Zoom soft key to display the following soft keys Offsetting the Center Radar Display Zoom Window Hiding the Ship’s Heading Marker SHM Radar Display with an Offset Center Chart Display Control Functions Moving Around the ChartChanging the Chart Center Using Find Ship 10 Changing the Chart Center Changing the Chart Scale 11 Changing the Chart Scale 12 Chart Boundaries Center of the screen Radar/Chart Overlay Information is availableRange key as many times as required Radar/Chart Overlay Typical Chart Scenarios Goto a WaypointFollow a Route Cursor Echo Place and Goto a Waypoint Waypoint Make and Follow a Route Make Review Your Passage Plan Plan Displaying the Radar and Synchronizing Radar & Chart Radarthe Synchronizing Chart Hsb 2 Plus Series Color LCD Display Standard Radar Operations Range Control Changing the RangeStandard Range Scale Determining Actual Radar Range Radar Range ScalesRadar Range Antenna Height m Target Height m Maximum Range nm Interpreting and Adjusting the Radar Picture Controls to Adjust the Radar Picture Control Option Function Default SettingIdentifying False Echo Returns Side Lobes Indirect Echoes Multiple EchoesBlind Sectors or Shadow Effect This is not very common Adjusting Gain, Sea Clutter, Rain Clutter and Tune Pulse width used Gain Control and Sea Control Change the range scaleSmall or weak targets Speckle and therefore improve target definition Tuning the Receiver Rain Clutter Control, using Rain and FTC Merge and appear as one echo Bad weather Changing the Targets Display Status Bar Interference Rejection Target ExpansionTarget Wakes Measuring Range and Bearing Using VRM/EBLs 11 EBL and VRM Displays Measuring Range and Bearing to Target from Vessel Placing a VRM/EBL Moving an Existing VRM/EBL OFF to on Measuring Range and Bearing Between Targets Float Deleting an Existing VRM/EBLFloating a VRM/EBL VRM/EBL is reset to your vessel’s position Moving and Unfloating a Floating EBL Controlling VRM/EBL Data Boxes Press the Float soft keyKey to unfloat VRM/EBL2 From on to OFF Setting Guard Zones and Alarms 13 Guard Zone Display Placing a Guard Zone 14 Placing a Guard Zone Moving, Reshaping or Deleting a Guard Zone OFF Controlling Guard Zone Alarms Press the Alarm soft key to highlight the Alarm slider Marpa Introduction to Marpa Risk Assessment Target Data Using Marpa Target Vector and HistoryRepeater Displays Radar Range Scales Cancel a Target Acquire a TargetView Target Data Cle drawn around it. The default soft keys are displayed PlayedKey to toggle the data box on/off Marpa Integrated Radar Operations Function of External DataData Example source Integrated functions available Changing the Heading Mode True and Relative MotionHeading Modes Heading modes are as follows Selecting the Heading and Motion Mode Effect on VRM/EBLs Using Marks Mark is placed using the default symbolPlacing a Mark Man Overboard MOB Moving or Deleting a Mark MOB Alarm Cursor Echo Standard Chart Operations Safety Using Chart Cards Inserting a Chart Card Removing a Chart Card Displaying the Chart Data Chart Source Data Displaying Object Information Port Symbols Port Area Tide Data Tide Data Nearest Nearest Port Typical Data Working with Waypoints Introduction To access the place waypoint soft keys, press Marks Placing a Waypoint Waypoint List WPT Position Loran TDs Selecting a Waypoint Waypoint Data DisplayFollowing soft keys are displayed Waypoint List and associated soft keys are displayed Editing the Waypoint Details Waypoints placed at the vessel position Screen and the Waypoint List is updated Erasing a WaypointMoving a Waypoint Waypoint soft keys are displayed Using the ST60 or ST80 Navigator Keypad To move a waypoint using the cursor Selecting an Entry in the Waypoint List Editing Entries in the Waypoint, Route, or Track Lists Working with Routes Creating a New Route Route soft keys are displayed When you have entered all your waypoints, either Bered to identify the new positionsCursor to the last placed waypoint Changes to a solid line Make Route Waypoints Saving the Current Route Soft keys are displayed as illustrated in FigureNext available entry on the route list is highlighted Clearing the Current Route Retrieve a Route From the Database Displaying Route Information Route Leg and Waypoint Information Using Route Information to Review Your Passage Plan To display information about any route in the database Using the Route List to Erase and Name a Route Route Information Window Editing a Route Inserting a Waypoint into a Route Adding Waypoints at the End of the Route Removing a Waypoint from the Route Reversing the Route Following Routes and Going to Points Follow a Route To follow the current route Press the Follow Route soft keyAlternatively, to follow a route Are displayed then press Follow Route Target Point Arrival Other Follow Route OptionsJoining a Route Restart Cross Track Error XTE Going To an Individual Target PointAdvancing to a Waypoint Stop Follow or Stop Goto Stop GOTO/FOLLOW soft key Transferring Waypoints and Routes Displayed SeaTalk WaypointsManaging Database Lists User Card Menu and associated soft keys are displayed If the operation fails, the Save Failed message is displayed Press the soft key Receive Wpts from ST/NMEA Point Transfer soft keyPress the soft key Send WPT List on Nmea Using Tracks Using Tracks Setting Up a Track Setting Up a Track Clearing the Current Track To clear the current track Managing Tracks Saving and Naming a TrackPop-up and associated soft keys are displayed Next available entry on the track list is highlighted Naming, Erasing and Showing a Track Further Chart Operations COG GPS Measuring Distances Using the VRM/EBL Key Measuring Distance Using a VRM Toggle the ruler line and data box off To clear the ruler data boxOn to toggle the ruler data box off Enter to take cursor control of the box Alarms and Timers Alarm ReportingExternal Alarms Setting Alarms and Timers Alarm on againPress Enter to save the changes and clear the list MOB Display Are removed GPS Setup Navigation Status Window GPS Set Up This soft key enables re-acquisition of a GPS position fixRestart GPS Data Log Mode To activate Data Log Mode Time Position CMG DMG Hsb 2 Plus Series Color LCD Display Setting Up the System Defaults Changing the Set Up Parameters Depend on the selected operating mode Setting Up the System Defaults System Set Up Parameters System Set Up ParametersMenu Options Factory New Default Temperature Units Bearing Mode Data BoxesCursor Reference Cursor Readout Menu Timeout Period Day/NightHelp Key Beep Auto Mode Manual ModeVariation Source Bridge Nmea Heading Nmea Out Set Up Date and Time SettingsCursor Echo Compass Set Up GPS SOG/COG FilterLanguage Medium or LOW Radar Set Up Parameters Parameter Options Factory Default New DefaultEBL Display Range Default Setting nm New Setting nm Timed Transmission OptionMarks Options Custom Scale Bearing Alignment Antenna SizeSend on HSB Radar Range Scale Increments Marpa Set Up Parameters Target Vector and Predicted PositionSafe Zone Target History Advanced Settings Display TimingFunction Slider Range STC Preset Tune Preset Chart Set Up Parameters Customize Chart Plotter Mode Chart Orientation Radar/Chart Synch Object InformationWaypoint Options Vectors Position Offset To set a new offset value Installation Typical System Single Display Unit Planning the Installation EMC Installation Guidelines Suppression Ferrites Connections to Other Equipment Parts and Accessories Unpacking and Inspecting the ComponentsSupplied with Option for Selecting the Display Unit Location Selecting the Display Unit Location 7 LCD Color Display Dimensions 10.4 LCD Color Display Dimensions Power Cable Consider the following before installing the system cablesCable Runs RC530/631 Inter-Unit Scanner Cable Hsb2 Cable Mounting the Display Unit Mounting BracketConsole Mounting Installation DC Power Connection Power for External EquipmentSystem Connections Grounding the System Radar Display Connector Panel Display Unit Connection Scanner Connection master displays Radar Scanner Connection Power and Nmea Input Connection Any unused wires should be insulated and taped backPin No Function Color Radar System Tests and Installation Alignment Switch On and Initial SetupSystem Check Radar System Checks and Adjustments Ensure the display unit is in Radar modeTransmission Check Bearing Alignment Display Timing Adjustment 10 Radar Set Up Menu 11 Radar Display Timing Integrated Systems Hsb2 High Speed Bus Multiple Display SystemsDC-DC Converter for External Equipment Hsb2 Connection Hsb 2 Series Master DisplaysMaster Function Display type Transducer 13 hsb2 Connector Multi-display connections SeaTalk and Nmea Function of SeaTalk and Nmea DataData Primary Uses Suggested Source Nmea SeaTalk SeaTalk Connection Nmea Nmea Input Connection Using the SeaTalk Auxiliary Junction Box 18 Using the Auxiliary Junction Box Data Output Data Conversion Integrated System Checks Received DataTransmitted Data Transmitted Data Maintenance and Problem Solving MaintenanceCleaning Instructions EMC Servicing and Safety Guidelines EMC Servicing Safety Guidelines Resetting the System Power On Default SettingsPower-on setting Problem Solving Common Problems and Their SolutionsProblem Correction Technical Support How to Contact Raymarine US For Marine Product and Services InformationFor Accessories and Parts For Product Repair and Service How to Contact Raymarine Europe Accessories and PartsWorldwide Support Appendix ASpecification Hsb2 Series 7and 10.4 LCD Color DisplaysGeneral Radar Features Scanner Control Chartplotter Features Navigation Information Interfacing High Speed Bus Appendix B Using the Auxiliary Junction Box Raystar 112, 105, Apelco 182 and 182XT GPS Autohelm GPS, Z260 and Z273 Raystar 112, 105, Apelco 182 and 182XT Raystar 112LP SeaTalk version Raystar 114 Combined GPS and Differential Beacon Receiver Spply Raystar 120 Waas Satellite Differential Receiver Appendix C C-MAP Chart Card Features Menu Option Chart Features Data Land Features Following chart features are always displayed Ports Features Hsb 2 Plus Series Color LCD Display Appendix DSeaTalk and Nmea Data Received and Transmitted Data Received Source Data Output SeaTalk Nmea Out APB, RMB Appendix E Connecting a Raymarine Heading Sensor Series Course Computer Figure E-1 hsb2 System with a G-Series Course Computer Appendix F Abbreviations Cross Track Error Lat Latitude Lbs PoundsLiquid Crystal Display Lon Longitude Magnetic Mmeters Index BDI Xvi Xvii Xviii Xix Hsb2 Plus Series Color LCD Display Xxi Xxii Limited Warranty Certificate Warranty Limitations Factory Service Centers United States of America UK, Europe, Middle East, Far East