Chapter 2: Getting Started & Adjusting the Display

2-15

 

 

SCREEN To display the active waypoint:

WAYPOINT

1.

Press the SCREEN soft key.

 

OFF

ON

2.

Press the WAYPOINT soft key to toggle the setting ON.

 

 

 

To return to the default soft key display, press ENTER.

The standard radar picture is displayed again, with the active waypoint joined to your vessel’s position by a dotted line. If the waypoint is off-screen, the dotted line is extended to the edge of the radar picture.

Active waypoint

Customizingthe

 

ScreenPresentation

Options

Presentation

 

 

the

 

 

 

Customizing

 

Options

 

 

Screen

 

SCREEN

CUSTOM OFF ON

D3989-2

Figure 2-7: Active Waypoint on a Radar Display

Custom Options - Chart mode

When chart details have been customized in the Chart Set Up menu (as described in Section 7.7) the SCREEN soft key can be used to switch the custom chart options off or on:

When set to ON, all chart options set to CUSTOM in the Customize Chart menu are displayed; when set to OFF, options set to CUSTOM are not shown.

The factory default for custom chart options is ON.

To switch the customized options on or off:

1.Press the SCREEN default soft key.

2.Press the CUSTOM soft key to toggle the setting from OFF to ON or from ON to OFF.

To return to the default soft key display, press ENTER.

Page 51
Image 51
Raymarine Combined Pathfinder Radar, RL80CRC PLUS manual Custom Options Chart mode, Screen To display the active waypoint