Raymarine RL80CRC PLUS manual Clearing the Current Track, To clear the current track

5-40 hsb2 PLUS Series Color LCD Display

Clearing the Current Track

	1 sec	12½ min
	5 sec
		1 hr, 2½ min
	10 sec
			2 hrs, 5 min
	30 sec
SETTING				6 hrs, 15 min
	1 min
					12 hrs, 30 min
	3 min
						1 day, 13 hrs, 30 min
INTERVAL	5 min
						2 days, 14 hrs, 30 min
	10 min
							5 days, 5 hrs
	30 min
TRACK								15 days, 15 hrs
		TRACK TIME
	0.1 nm
			75 nm
	0.5 nm
				375 nm
	1.0 nm
					750 nm
		TRACK DISTANCE							D4948-2

Figure 5-9: Track Interval Setting Guide

You can change the setting at any time. The setting applies only to the current track and is not saved as a stored track.

➤To set up a track:

1.Press the MORE soft key to access the TRACK INTERVAL soft keys.

Press the appropriate soft key to set either a time interval or a distance inter- val; press the UP arrow to increase the interval, the DOWN arrow to decrease the interval.

Press ENTER to return to the track soft keys.

	TRACK INTERVAL		TRACK
		0.1nm	LIST	MORE¬
				D5674-1
TRACK	2. Press the TRACK OFF ON soft key to toggle tracks on.

OFF ON

Your vessels trail will be displayed on-screen, with a line joining the points at the selected interval.

Clearing the Current Track

You can clear the current track from the screen. When you select CLEAR TRACK, if the current track has not been saved, you have the option of saving it.

➤To clear the current track:

CLEAR	1. Press the CLEAR TRACK soft key.
TRACK

2.If the track has not been saved the SAVE TRACK soft keys are displayed. To clear the track without saving it in the Track List, press NO.

SAVE

TRACKTo save the track in the list, press YES. The Name track soft keys are dis- played and you should continue as described in the following section, Sav- ing and Naming a Track.