Raymarine Raychart Chartplotter RC530 PLUS, RL80CRC PLUS manual Going To an Individual Target Point

Chapter 5: Standard Chart Operations 5-33

Advancing to a Waypoint

➤Once you are following a route, you can advance to the next waypoint, even if you have not reached the current target waypoint:

	1. If necessary, press the GOTO default soft key to display the Goto/Follow
GOTO
	soft keys.		RESTART	WAYPOINT
	STOP	GOTO
	FOLLOW	CURSOR	XTE	ADVANCE

	D4172-1
	2. Press the WAYPOINT ADVANCE soft key. The current leg of the route is aban-
WAYPOINT	doned and the next waypoint becomes the target. The display is updated to
ADVANCE
	show the new route leg.

	Restart Cross Track Error (XTE)
	While you are following a route, or going to a target point, you can restart the
	XTE. This sets the XTE to zero and moves the origin to the actual vessel
	position.
	Restarting XTE is useful if you find yourself off track and want to go straight
	to your target, rather than get back onto the original track.
	➤ To restart XTE:
	1. Press the GOTO default soft key, the Follow/Goto soft keys are displayed.
GOTO
RESTART	2. Press the RESTART XTE soft key. The route origin moves to the current vessel
	position, thus the XTE becomes zero.
XTE

Going To an Individual Target Point

Rather than following a route, you can go directly to a selected target point, this can be an existing waypoint (not in the current route), or the cursor position.

➤ To navigate directly to an existing waypoint:

1. Use the trackpad to position the cursor over the required waypoint until the

Point

Individual Target

Going To an

WPT

letters WPT and the waypoint soft keys are displayed.

GOTO EDIT ERASE MOVE

WAYPOINT WAYPOINT WAYPOINT WAYPOINT

D4163-1

Alternatively, you can select the waypoint from the waypoint list as described in Section 5.3.