Raymarine Combined Pathfinder Radar, RL80CRC PLUS Radar/Chart Overlay, Information is available

Chapter 2: Getting Started & Adjusting the Display 2-23

•If Plotter Mode is Off, the chart scale remains unchanged, indicating the smallest chart scale is displayed.

Note: If Plotter Mode is Off and the cursor is homed to the vessel (see Using FIND SHIP on page 2-20), if the vessel moves outside an area of available cartography, the chart will automatically re-scale to the next range with cartography.

•If Plotter Mode is On, the scale is decreased and the message NO CHART DATA is displayed. The vessel, waypoints, routes and tracklines are dis- played without cartography.

	The chart information is restored when you return to a chart scale for which the
	information is available.
RANGE	➤ To zoom out to a smaller-scale (less detailed) chart, simply press the upper part
	of the RANGE key as many times as required.

Overlay
Radar/Chart	Overlay
Radar/Chart

Radar/Chart Overlay

If radar data is available, as a function of the combined radar/chart display or from another display connected on hsb2, the radar targets can be overlaid on to the full-screen chartplotter display. The radar/chart overlay option helps you to distinguish between fixed, charted objects and other objects that could be moving vessels. Some radar controls are available in overlay mode.

The following criteria must be true for radar/chart overlay to function correctly:

•Position and heading data are provided so that vessel position and orienta- tion can be determined.See Heading and Position Data on page 1-9for further details.

•The vessel must be displayed on screen.

•The chartplotter must be in North Up or Course Up mode (see Section 7.7).

•The chartplotter range must be between 1/4nm and 48nm (equivalent to a radar range of 1/8nm to 24nm).

•Custom range scales are disabled on the radar.

•The radar must be transmitting.

To ensure the vessel remains on the screen, you could use Find Ship (see Using FIND SHIP on page 2-20) to home the cursor onto the vessel.

When Radar/Chart overlay is switched on, the status bar indicates OVL. If the option is switched on but the overlay is not visible (because one of the above criteria has failed), the status bar indication changes to (OVL).