Raymarine RL80CRC PLUS Bered to identify the new positions, Cursor to the last placed waypoint

Creating a New Route

5-20	hsb2 PLUS Series Color LCD Display
	Note: You can position the cursor on an existing waypoint – the cursor text
	WPT indicates you are re-using the waypoint rather than placing a new one.
	This waypoint is included in the route when you press PLACE WAYPOINT.
	The waypoint appears on the screen at the cursor position. The number
	displayed alongside the waypoint identifies its position in the route. The
	new waypoint is temporarily added to the waypoint list with the first avail-
	able waypoint number. The waypoints in the current route are re-num-
	bered to identify the new positions.
	Note: If you Clear the route before it is Saved, the waypoint is removed.
	4. Move the cursor to the next waypoint position. A dotted line connects the
	cursor to the last placed waypoint.
PLACE	5. Press PLACE WAYPOINT again. The waypoint is placed and the dotted line
WAYPOINT	changes to a solid line.
	If you placed the waypoint incorrectly, you can delete the last-placed way-
UNDO	point by pressing the UNDO WAYPOINT soft key.
WAYPOINT	6. Repeat steps 4 and 5 until you have placed all your waypoints. You can
	have up to 50 waypoints in a route.
	7. When you have entered all your waypoints, either:
ACCEPT	Press the ACCEPT ROUTE soft key (or ENTER) to complete the route. Your
ROUTE	route is displayed on the screen, and is the current route, but it is not active.
	The first waypoint of a new route is outlined with a square, indicating that
	it will be the target waypoint when the route is activated. If selected, the
	waypoint data box is displayed for the target waypoint.
	You can save the route as described below.
	Note: The completed route is stored in the display unit, and will be re-dis-
	played if you turn the unit off and on again. However, on an integrated system
	it is possible for a current route from another unit to overwrite this route; it is
	therefore recommended that you Save the route as described below.

➤To make a new route using the Waypoint List:

1. Press the ROUTE soft key; the route soft keys are displayed.

MAKE EDIT CLEAR

ROUTE ROUTE ROUTE MORE¬

D4167-1A

2. Press the MAKE ROUTE soft key; the make route soft keys are displayed.

PLACE	UNDO	ACCEPT	USE D5575-1
WAYPOINT	WAYPOINT	ROUTE	WPT LIST