Raymarine Chartplotter RL70CRC PLUS, RL80CRC PLUS manual Naming, Erasing and Showing a Track

SmartRoute

5-42 hsb2 PLUS Series Color LCD Display

Naming, Erasing and Showing a Track

➤To name an existing track, erase a track or show a track, you select the track from the track list, then press the appropriate soft key as follows:

TRACK	1. Press the TRACK LIST soft key. The Track List is displayed. The selection bar
LIST	indicates the selected track.
	Select the required track then press the appropriate soft key.

NAME

TRACK 2. If you NAME a track, use the trackpad to move the cursor right or left to the character you wish to edit. Then use the top or bottom of the trackpad to edit the letter or number. Press ENTER finish the operation or CLEAR to cancel the name, then ENTER to remove the track list.

ERASE	3.	If you ERASE a track you are prompted to confirm.
TRACK		Press NO to cancel the operation, then ENTER to remove the track list.
		Press YES to erase the track from the list, then ENTER to remove the track
		list.
	4.	If you SHOW a track, and you have a current track on screen, you are
SHOW		prompted to save the track. Proceed as previously described in Clearing the
TRACK		Current Track.
		Alternatively, press the NO soft key to cancel the SHOW TRACK operation.
		The track list is removed and the selected track is displayed.
	5.	Press ENTER or CLEAR to return to the default display.

SmartRoute

SmartRoute enables the current track, or the last segment of a track with breaks, to be converted to a route (the track could have been retrieved from the track list). SmartRoute places a waypoint at the last track point, then considers each point in turn and determines the closest route through the recorded track. The number of waypoints created is minimized, whilst maintaining optimum correlation to the recorded track. On completion, the maximum deviation of the route from the recorded track is displayed.

➤To convert the current track into a route:

1.Select MAKE INTO ROUTE and press ENTER.

The current track is converted to a new route and becomes the current route, with the most recently placed track point as the start of the route, i.e. the track is reversed.

If there is an unsaved current route on screen, the option to save the route is given, see Section 5.4, Working with Routes.

2.Check the calculated route and, in particular, that the route deviation from the original, given in the warning box, is within navigable limits.

CAUTION:

Before following the route, ensure that it is safe for navigation, noting that it may deviate from your actual path travelled.