Raymarine Combined Pathfinder Radar, RL80CRC PLUS manual Setting Alarms and Timers, Alarm on again

Chapter 6: Further Chart Operations 6-5

Setting Alarms and Timers

➤To set up an alarm or timer:

1. Press the ALARMS key. The Alarms Set Up menu is displayed, showing

ALARMS

the current settings (see Figure 6-2).

2.Use the trackpad to move the selection bar up or down the options. As each line is highlighted, the soft key labels are updated to show the current set- tings and controls.

ALARMS SET UP

ARRIVAL ALARM	0.01nm
OFF TRACK ALARM	ON
ANCHOR ALARM	OFF
COUNTDOWN TIMER	00:33:00
ALARM CLOCK	OFF

SELECT ARRIVAL

ALARM RADIUS

D4265-2

Figure 6-2: Alarms Set Up List

3.Use the up or down soft keys to change the alarm setting. For example, for the arrival alarm you can adjust the radius from the waypoint at which the arrival alarm will be triggered.

The alarm distances can be set in the range 0.01 to 9.99 nm, in steps of 0.01nm. The timer is set in hours, minutes and seconds, and the alarm clock in hours and minutes.

ALARM		4. If required, press the ALARM OFF ON soft key to toggle the alarm on or off.
OFF	ON	If you turn an alarm off, its value is retained and will be used when you turn
		the alarm on again.

Note: You can turn all the alarms and timers on and off, except for the Arrival Alarm which is always on.

5. Press ENTER to save the changes and clear the list.

Setting Alarms and Timers