Raymarine Raychart Chartplotter RC530 PLUS manual Offsetting the Center, Radar Display Zoom Window

Chapter 2: Getting Started & Adjusting the Display 2-17

3.Press the required zoom option soft key, INTO WIN or FROM WIN.

The soft keys are cleared, and the cursor has control of the zoom box that indicates the area to be enlarged. This is indicated by the letters ZMB in inverse video, and the four-headed cursor symbol. The zoom box defaults to its last-used position since power-on.

4.Use the trackpad to move the zoom box to the required area, and press

ENTER.

The selected area is shown in an enlarged format, either in the quarter- screen Zoom window (INTO WIN) or in the main window (FROM WIN).

➤To move the enlarged area in view in the window:

1.Move the cursor over the edge of the zoom box in the original radar picture, until the letters ZMB appear under the cursor.

2.Press ENTER to take control of the zoom box. The cursor shape changes to a four-way arrow.

3.Use the ltrackpad to move the zoom box over the required area.

4.Press ENTER again to drop the zoom box, update the enlarged version, and return the cursor to normal control.

Centerthe
the	Center
Offsetting
Offsetting

3nm	RINGS		126°T	RM RV3	AUTO
		1/2		H-UP	T	IR
				ZMB
			RADAR ZOOM ( x2 )
CURSOR
BRG 033° R
RNG 1.78nm

Zoom Box, indicating the enlarged area. You can move this using the context-sensitive cursor, to change the image in the Zoom Window

Zoom Box cursor text

Zoom Window, providing a times 2 enlargement of the area shown in the Zoom Box

D3972-2

Figure 2-8: Radar Display Zoom Window

Press DISPLAY then ENTER to exit the Zoom mode.

Alternatively, you can press and hold DISPLAY for 2 seconds.

Offsetting the Center

The radar picture is normally shown with your vessel at the center of the display. However, you can move the center, so that your vessel is offset by up to 66% of the radius, anywhere on the screen.