Raymarine Raychart Chartplotter RC530 PLUS, RL80CRC PLUS manual Editing the Waypoint Details

Chapter 5: Standard Chart Operations 5-13

While the cursor is over the waypoint, the waypoint soft keys are displayed.

➤To remove the waypoint data box and soft keys either: Move the cursor away from the waypoint, or press CLEAR.

➤To display the waypoint details from the waypoint list: Select the waypoint in the list as described above.

MARKS	The details for the selected waypoint are displayed in the lower half of the
WAYPOINT	window. Temperature, depth, date and time are included (if available) for
	waypoints placed at the vessel position.
LIST

To remove the Waypoint List and return to the default soft key display, press CLEAR twice.

Editing the Waypoint Details

You can change the name, symbol and position of any waypoint.

➤To edit a waypoint:

1.Select the waypoint, using the cursor or the waypoint list, as previously described. The waypoint soft keys are displayed.

EDIT	2. Press the EDIT WAYPOINT soft key. The Edit Waypoint soft keys are dis-
WAYPOINT
	played:

SYMBOL NAME POSITION

D4166-1

3.To edit the symbol, press the SYMBOL soft key.

Use the soft keys, shown in the following illustration, to highlight the required symbol, then press ENTER to confirm the selection.

Press ENTER or CLEAR to return to the default soft keys.

Editing the Waypoint Details

SELECT SYMBOL

D4178-1

4.To edit the waypoint name, press the NAME soft key. The NAME WAYPOINT window is displayed.

Use the trackpad to enter or edit the name:

Use the left or right side of the trackpad to move the cursor to the character you wish to change.

Use the top or bottom of the trackpad to scroll through the characters.

When you have finished editing the name, to remove the window, press ENTER to save the name or CLEAR to cancel the operation. The waypoint name replaces the waypoint number.

Press ENTER or CLEAR to return to the default soft keys.