Raymarine RL80CRC PLUS, Raychart Chartplotter RC530 PLUS, Chartplotter RL70CRC PLUS manual

2-12 HSB Series Color LCD Display

GAIN

Not used in Chart mode.

VRM/EBL

Use to measure range and bearing to/between points.

-Position cursor at start point, and press VRM/EBL key to display the Ruler data box. Select end point using trackpad, and press ENTER to fix end position of ruler.

MULTI

Controls display lighting.

Press and hold MULTI key to set brightness to 100%. - Press to display slider.

O

F

F

LIGHT

Select the slider using the soft key or trackpad. Toggle between off/on by pressing the soft key again. Adjust slider using trackpad, and press ENTER to finish.

ALARMS

Use to set up the chartplotter alarms.

-Press to display the Alarms set up menu and soft keys, the soft keys correspond to the selected alarm.

ALARMS SET UP

ARRIVAL ALARM		0.01nm
OFF TRACK	ALARM	OFF
ANCHOR ALARM		OFF
COUNTDOWN	TIMER	00:33:00
ALARM CLOCK		OFF

SELECT ARRIVAL

ALARM RADIUS

Use the trackball to select the alarm, then use the softkeys to adjust parameters and/or toggle the alarm on/off.

Press ENTER to finish.

Chartplotter

Soft Key Labels:

Change when you press a key.

Default soft key labels are shown.

ROUTE GOTO SCREEN FIND SHIP

Soft keys

Press to select option, or slider.

Labels change when you press soft/dedicated key. Elipses (...) after the text indicate that pressing soft key leads to a further display of soft key options.

ENTER

Confirms selection and (if appropriate) clears current soft key labels. It performs the selected task, accepts changes, or displays more options.

When cursor text is displayed, takes cursor control of the object.

When arrow-head cursor symbol is displayed, drops the object under cursor control.

CLEAR

Cancels operation in progress and returns to the previous display.

Deletes an object/function under cursor control.

Trackpad

Controls cursor position and the slider values. Hold the trackpad down to move the cursor faster.

POWER

Press and hold until unit beeps to turn on display. Press for 3 seconds to turn off display.

DISPLAY

Controls display mode and windows.

-Press for display mode and soft keys display.

-Press again to toggle through display modes, then ENTER.

-Press and hold for 2 seconds for full screen display of the upper window.

WINDOWS		SELECT	OVERLAY
OFF	ON	WINDOWS	OFF	ON

Press soft keys to toggle window on/off and to select lower window.

Press ENTER to finish.

MARKS / MOB

Controls waypoints, and Man Overboard function.

-Press to display waypoint soft keys.

-Press and hold for 2 seconds to activate or cancel MOB.

PLACE WPT	PLACE WPT	WAYPOINT	LOAD/SAVE
AT CURSOR	AT VESSEL	LIST	USER CARD

Press soft key to place waypoint at cursor or vessel, or display the waypoint list and asscociated soft keys.

Press ENTER to finish.

RANGE

Controls chart scale.

Displayed vertical distances are shown in the Status Bar.

-Press top of key to increase the chart distance.

-Press bottom of key to decrease the chart distance.

-Press and hold to change the scale faster.

MENU

Provides access to setup options. - Press to display soft keys.

SYSTEM	CHART	TRACK	GPS
SET UP¬	SET UP¬	SET UP¬	SET UP¬

Press soft key to display required setup menu, then use trackpad to select option and soft key to change option.

Press ENTER to close menu, and CLEAR to to finish.

D5570-1