Raymarine Chartplotter RL70CRC PLUS, RL80CRC PLUS manual Erasing a Waypoint, Moving a Waypoint

Erasing a Waypoint

5-14 hsb2 PLUS Series Color LCD Display

5. To edit the waypoint position, press the EDIT WAYPOINT soft key, followed

EDITby POSITION. The Waypoint Position pop-up is displayed.

WAYPOINT

Use the soft keys to select LAT, LON, BRG or RNG. Use the trackpad to edit the value:

Use the left or right side of the trackpad to move the cursor to the character you wish to change.

Use the top or bottom of the trackpad to scroll through the characters. Adjust each parameter until the waypoint position is correct.

When you have finished editing the position, press ENTER to save the position or CLEAR to cancel the operation. Press ENTER or CLEAR again, the Waypoint Position window is removed from the screen and the default soft keys are displayed.

Erasing a Waypoint

You cannot erase the target waypoint or waypoints that are used in routes. However, you can remove a waypoint from the current route - see Editing a Route on page 5-27.

If you try to erase a waypoint that is used in a saved route you are warned

“WAYPOINT IS USED IN A ROUTE & CANNOT BE DELETED”

➤To delete a waypoint using the cursor:

1. Move the cursor over the waypoint, until the letters WPT are displayed. The

WPT

waypoint soft keys are displayed.

ERASE	2. Press the ERASE WAYPOINT soft key. The waypoint is removed from the
WAYPOINT	screen and the Waypoint List is updated.

Note: If you have stopped a GOTO (see Stop Follow or Stop Goto on

page 5-34), the target waypoint remains displayed as a target; you need to use the CLEAR GOTO soft key before you can erase the waypoint using the cursor.

➤To delete a waypoint using the waypoint list:

1. Select the waypoint from the waypoint list as previously described. The

MARKS

waypoint list soft keys are displayed.

WAYPOINT	2. Press the EDIT WAYPOINT soft key, followed by ERASE WAYPOINT. The way-
LIST	point is removed from the screen and the waypoint list is updated.

Moving a Waypoint

You can move any waypoint except the target waypoint (the waypoint you are following). You can use the Waypoint soft keys and cursor to move the selected waypoint, or you can edit the waypoint position.