Raymarine Raychart Chartplotter RC530 PLUS Editing Entries in the Waypoint, Route, or Track Lists

Chapter 5: Standard Chart Operations 5-17

Editing Entries in the Waypoint, Route, or Track Lists

You can also use the Navigator Keypad to edit an existing item or to name a new item in the Waypoint List, Route List, or Track List. You first must enter the edit mode for the list you want to modify. Methods for editing each list are described in the respective sections of this chapter.

➤To edit an item in a list using the Navigator Keypad:

1.If necessary, use the right and left arrow keys to move the cursor to the desired character position.

2.Press an alphanumeric key until the desired character is displayed. Each time you press one of these keys in succession, the next character on that key is input.

or

1.Use the up and down arrow keys to scroll through the list of alpha, numeric, and special characters until the desired character is displayed (just as you would with the trackpad). Note that you must use this method to input spe- cial characters; they are not available using the alphanumeric keys.

Use the del key to insert a space, if required.

2.Use the arrow keys and alphanumeric keys to input the remainder of the characters required to complete the editing.

3.When done, press the ins key to enter your changes.

Keypad

ST80 Navigator

Using the ST60 or