Sonance ST2432D Series 24” x 24” Hemispherically-RadiatingSpeakerTile, Polar Response, On-Axis

ST2432D Series

24” x 24” Hemispherically-Radiating SpeakerTile®

Polar Response: Performance Specifications:

50dB 40dB 30dB 20dB

10dB

0dB

0dB

10dB

20dB

30dB 40dB 50dB

50dB 40dB 30dB 20dB

10dB

0dB

0dB

10dB

20dB

30dB 40dB 50dB

90°

500Hz

270°

90°

1kHz

270°

Radiating Surface: 549 in2 (3,540cm2) Planar Diaphragm

60°		300°
30°		330°
	0°	500Hz
50dB 40dB 30dB 20dB 10dB 0dB	0dB 10dB	20dB 30dB 40dB 50dB
90°	2kHz	270°

60°			300°
30°	0°	330°	1kHz
50dB 40dB 30dB 20dB 10dB 0dB	4kHz	0dB 10dB 20dB 30dB 40dB 50dB
90°			270°

Tweeter System:	0.82 lb (0.37kg) Magnet with 1.02” (26mm) voice
	coil; 1,200Hz, 12dB/octave high-pass crossover
Woofer System:	0.82 lb (0.37kg) Magnet with 1.02” (26mm) voice
	coil; 1,200Hz, 12dB/octave low-pass crossover
Frequency Response:	40Hz – 19kHz ±4dB

60°

30°

	300°
	330°
0°	2kHz

60°

30°

330°

0°

300°

4kHz

Power Rating:	75 Watts RMS as per EIA standard RS-426-A
Pressure Sensitivity:	92dB, 1W/1m
System Impedance:	8 ohms nominal, 5.5 ohms minimum

50dB 40dB 30dB 20dB 10dB 0dB	0dB 10dB	20dB 30dB 40dB 50dB	50dB 40dB 30dB	20dB 10dB 0dB	0dB 10dB	20dB 30dB 40dB 50dB
90°	8kHz	270°	90°		16kHz	270°
60°		300°	60°			300°
30°		330°		30°		330°
	0°	8kHz			0°	16kHz

Transformer:	Primary Voltage — 70.7 Volts
	Primary Taps — 0.5, 1, 2, 4, 8, 16, 32 Watts;
	8-ohm bypass
Dimensions (H x W x D):	237/16” x 237/16” x 3” (595mm x 595mm x 76mm)
Product Weight:	11.0 lbs (5kg) each

Installation Example:	Shipping Weight:
	On-Axis
Ceiling Tile	Frequency
panel of backbox)	Response:
(used as rear

PBB 2.0

Backbox

ST2432D

SpeakerTile

50 25

dB

40

30

20

10

0

20 Hz

15.5 lbs (7kg) each

50

dB

40

30

20

10

0

50 100 200 500 1 kHz 2 5 10 20

T-Bar

Ceiling

Grid

212 Avenida Fabricante

San Clemente, CA 92672

(800)592-4644 • (949) 492-5449

FAX: (949) 361-5151 www.soundadvance.com

Architects and Engineers Specification:

The ST2432D SpeakerTile® shall be a dual-driver, two-way, full-range device, producing frequencies from 40Hz to 19kHz in both horizontal and vertical planes. The SpeakerTile shall have a sensitivity of 92dB (1W/1m), with a rated power of 75 watts RMS according to EIA standard RS-426-A.

The total radiating surface area shall be 549 in2 (3,540cm2). The high- frequency dispersion shall be at least 140° to the upper frequency limit of the device in question, in both horizontal and vertical planes.

All SpeakerTile models shall have an exterior frame constructed of extruded aluminum that is 237/16” (595mm) in length, 237/16” (595mm) in width, and 3” (76mm) in total unit depth, not including backbox. The complete unit shall weigh not more than 11.0 lbs (5kg) without its mounting accessories.

The loudspeaker shall be the Sound Advance ST2432D or equivalent.

Warranty:

Sound Advance warrantees the ST2432D to be free of any defect in materials or workmanship for a period of 5 years from the date of purchase. During the warranty period, Sound Advance will repair or replace (at its option) all such defects without charge for parts or labor, if returned prepaid to the proper Sound Advance service facility, together with the original sales receipt or other proof of purchase. The unit will be returned prepaid.

©2006 Sound Advance. All Rights Reserved.
Sound Advance, SpeakerTile and Planar Diaphragm Technology are trademarks or registered trademarks of Dana Innovations.
Specifications subject to change without notice. For the latest Sound Advance product information please go to
www.soundadvance.com	05/06