Brother 885-V32 appendix Attaching the Embroidery Frame, Attaching the embroidery frame

EMBROIDERY —————————————————————————————————————————————

Attaching the Embroidery Frame

This section describes how to attach the embroidery frame.

Attaching the embroidery frame

aWind the embroidery bobbin thread onto the bobbin and set it into the bobbin case.

•For details, refer to "Winding/Installing the Bobbin" (page 22).

bRaise the presser foot lever.

a

aPresser foot lever

cPress (Needle position button) once or twice to raise the needle.

a

aNeedle position button

dPass the embroidery frame under the presser foot while raising the presser foot lever even further.

CAUTION

●Do not touch a button. If a button is accidentally pressed, the machine starts sewing, and your finger may be pricked with the needle or the needle may break.

eFirmly insert the embroidery frame guide into the embroidery carriage frame holder from the top.

Line up the embroidery frame guide tabs and the embroidery carriage frame holder slots and push in until it clicks and stops.

a

b

aEmbroidery frame guide tabs

bEmbroidery carriage frame holder slots

XThe embroidery unit is attached.

Note

zBe sure to insert both pins. If only the forward or the back pin is inserted, the pattern may not turn out correctly.

CAUTION

●Correctly set the embroidery frame into the embroidery frame holder. Otherwise, the presser foot may hit the embroidery frame, resulting in injury.

130