Pride Mobility Fast, Rock 3 manual Anti-Tip Wheel Installation Kids Rock 2 and Rock

I V . A S S E M B L Y

3.Hold the axle and wheel. Align the axle with the axle sleeve on the wheelchair.

4.Press the button on the axle and slide the axle into the axle sleeve.

5.Make sure that the axle is fully engaged by verifying that the button on the top of the axle pops out. See figure 21.

6.If included, install the hub cap by locating and rotating to lock into place.

7.Repeat for the rear wheel on the other side.

8.Fold the seatback into position. See III. “Your Wheelchair.”

9.Install the rear anti-tip wheels. See figure 22.

10.Install the calf protector. See figures 23 and 24.

11.Install the ACTIVE handle then verify the functionality of the ACTIVE mechanism. See figures 25 and 26.

12.Make additional adjustments to the wheelchair as necessary. See V. “Comfort Adjustments.”

Anti-Tip Wheel Installation (Kids ROCK 2 and ROCK 3)

Anti-tip wheels are integral and important safety features of your wheelchair. See figure 22.

PROHIBITED! Do not remove the anti- tip wheels or modify the wheelchair in any way that is not authorized by Pride.

WARNING! The anti-tip wheels should only be adjusted by a Quantum Rehab Provider or a qualified technician.

FOOT	CALF PROTECTOR
PLATE

Figure 23. Kids UP Series Calf Protector

CALF PROTECTOR

Figure 24. Kids UP Series Calf Protector Installation

To install and adjust anti-tip wheels:

1.To install, depress the snap button and insert the anti-tip wheel into the tube.

2.To remove, depress the snap button and remove the anti-tip wheel from the tube.

3.For only Kids ROCK 3, obtain the proper clearance by adjusting the position of the anti-tip extensions.

NOTE: The anti-tip wheels should be used at all times. They should be positioned 1.5 in. to 2 in. (3.81 cm to 5.08 cm) off the ground for proper function. The anti-tips should extend at least 4 in. beyond the point where the rear wheel touches the ground.

22 www.pridemobility.com Kids UP Series