V . C O M F O R T A D J U S T M E N T S

Adjustment of the Hip Guides (Adductors) or

Armrests/Hip Guides (Kids FAST)

1. Slotted adductor brackets should always be adjusted as far apart as possible. This will allow the seat cushion to be properly installed. See figure 34.

2. Adductor pads can accommodate a wide range of hip widths by adding or removing layers of 0.25-in. (0.64-cm) foam from the pad cover. Extra wide adductor covers are available.

Adjustment of the Adductors and Lateral

Supports (Kids ROCK 2 and ROCK 3)

1.The position of the lateral support plate can be adjusted using a 5/32-in. hex driver. See figure 35.

2.Loosen bolts and adjust to desired position.

3.Tighten bolts after adjustment.

4.Hip width can be adjusted by adding or removing layers of 0.25-in. (0.64-cm) foam from adductor covers. See figure 36.

Figure 34. Kids FAST Adductors

BOLTS

Figure 35. Kids ROCK 2 and ROCK 3 Lateral Plate Adjustment

ADDUCTOR PADS

Figure 36. Kids ROCK 2 and ROCK 3 Hip Width Adjustment

Kids UP Series

www.pridemobility.com

27

Page 27
Image 27
Pride Mobility Rock 3, Rock 2 manual Kids Fast Adductors