V . C O M F O R T A D J U S T M E N T S
WARNING! Avoid serious injury. Do not place items with strings around your child’s neck, suspend strings from the wheelchair, or attach strings to toys.
WARNING! Positioning belts should never be used for securement in motor vehicles. An additional automotive- rated seat belt is required.
To install the positioning belt:
1.Remove the seat cushion.
2.Use the positioning belt anchoring locations to attach the positioning belt, according to the manufacturer’s instructions. See figure 53.
3.Reinstall the seat cushion.
WARNING! Positioning belt should never be used for securement in motor vehicles. The wheelchair does not ship equipped with a
Glide Rest Adjustment (Kids FAST)
To allow optimal ACTIVE function, it may be neces- sary to adjust the glide rests. Proper adjustment of the glide rests will enable the shell assembly to make stronger returns to an upright position from the exten- sion position.
NOTE: The seat depth is measured from the front of the back cushion to the front edge of the seat cushion.
For seat depths 10 in. (25.4 cm) or less, glide rests must be installed in position 1. See figure 54.
For seat depths 10 in. (25.4 cm) or greater, glide rests can be installed in position 2. See figure 55.
To adjust glide rests:
1.Remove seat cushion.
2.Remove seat depth adjustment knob. See figure 28.
3.Remove lower shell assembly from upper shell assembly.
4.Using a
5.Install glide rest in desired position then reinstall bolts and tighten.
6.Repeat on opposite side.
7.Reinstall lower shell assembly, seat depth adjustment knob, and seat cushion.
POSITIONING BELT ANCHORING
LOCATIONS 
Figure 53. Positioning Belt Anchor Locations
BOLTS
Figure 54. Kids FAST Glide Rest in Postion 1
BOLTS |
Figure 55. Kids FAST Glide Rest in Position 2
Kids UP Series | www.pridemobility.com | 33 |
