Snapper 7600069 - 7600070 Install Grass Bags, Install Grass Bag Adapter, Install Cover Assembly

Install Grass Bags

1)Align the slot on the hanger of the Grass Bag Assembly (7500995) with the tab on the grass bag support.

2)Insert the tab into the slot. Repeat for all three grass bags. See Figure 4.

Install Grass Bag Adapter

1)46” & 52” Models Only – Attach the Latch Pin (M720543) to the appropriate Grass Bag Adapter, using one carriage bolt 1/4-20x5/8 (1960252) and one center lock flange nut 1/4-20 (1930642). See Figure 6 (inset).

2)The Grass Bag Adapter attaches to the deck using two bolts and two wing nuts, provided with the kit. See Figure 6. Note – some model tractors will already have the bolts installed in the deck. You can use them to attach the grass bag adapter.

Figure 4

Install Cover Assembly

1)Attach the Cover Assembly (7500996) to the Grass Bag Support. Insert one Hinge Pin (M720525) into each hinge, and secure with one Hair Pin (1960074). See Figure 5.

2)Lower the cover, and pull the latch down over the grass bag frame. The cover must be fully closed and latched.

Grass Bag Adapter

42” – 7501003 46” – M720560 52” – 7102377

Figure 6

3)Lift the discharge deflector. Align the two holes in the grass bag adapter with the holes in the deck. Note - do not remove the discharge deflector.

4)Insert two carriage bolts 5/16-18x1- 1/4 (1960223) from inside of deck. Note - insert forward carriage bolt first. Secure with two wing nuts 5/16-18 (M720125). Tighten wing nuts securely.

Figure 5

4Instruction Manual No. 7102356 (Rev. C, 06/04/2008) TP 200-5352-C-AT-N