Brother 885-V32 On the LCD was pressed when no card was inserted, Lever is lowered, Lowered

APPENDIX ——————————————————————————————————————————————

No	Error Message	Probable Cause
8		on the LCD was pressed when no card was inserted.
9		A stitch other than the buttonhole, bar tack or darning stitch was
		selected and the start/stop button was pressed while the buttonhole
		lever is lowered.
10		The buttonhole, bar tack or darning stitch was selected and the start/
		stop button was pressed while the buttonhole lever is raised.
11		The start/stop button, reverse/reinforcement stitch button or thread
		cutter button was pressed while the presser foot was raised.
12		The memory is full and the pattern cannot be saved.
13		You pressed the back key or the embroidery key when a pattern was
		selected or the utility stitch key when a stitch is selected.
14		You changed the stitch pattern settings, and then tried to save them by
		pressing the manual memory key.
		You tried to select an embroidery pattern or change the layout when
15		the needle was down.
		The machine is turned on while the needle is lowered and the
		embroidery unit is attached.
16		You tried to initialize the embroidery unit with the embroidery foot
		lowered.

160