DeWalt DPH3100 instruction manual Installation, Pressure Washer Assembly Fig, For Future USE

WARNING: RISK OF electri­cal­ Shock

What can happen How to prevent it

INSTALLATION

Pressure Washer Assembly (Fig. 1)

1. Place handle assembly (O) onto frame, depress

the snap buttons, and slide the handle assembly

onto the frame (F) until snap buttons are secured

•Spray direct­ed­ at electri­cal­ outlets or switches,­ or objects­ connect­ed­ to an electri­cal­ circuit, could result­ in a fatal electrical shock.

•Unplug any electri­cal­ly­ oper­at­ed­ product before attempting to clean it. Direct spray away from electric outlets­ and switches.

in place.	O
Caution: Risk of personal injury. Avoid placing F
hands between handle and frame when assembling
to prevent pinching.

2. Attach	high-pressure
hose (P) to spray gun.
Make	sure it is
secure.

English

WARNING: RISK OF INJURY FROM LIFTING

What can happen How to prevent it

3. Connect wand (E) to

spray gun. Make sure

connection is secure.

•Serious injury can result from attempting to lift too heavy an object.

•The pressure washer is too heavy to be lifted by one person. Obtain assistance from others before lifting.

4.	Thread the side handle (D) into spray
	gun extension and tighten to desired
	position.
5.	Place the nozzle holder (B) onto the

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

panel assembly (A) and push each	D
nozzle holder into place.

6.Remove the five colored quick-connect nozzles from the plastic bag and

insert	them	into
correct grommet on			B
the nozzle holder.
Nozzles	are	color	A
coded	to	match
colored	nozzles on

panel assembly.

9