Brother 885-V32 Connecting character patterns, Enter DEF and press Press KPress to turn it to

EMBROIDERY —————————————————————————————————————————————

Connecting character patterns

If the character pattern is too long to fit in the embroidery frame, follow the steps below.

Example: Connecting "ABC" with "DEF"

aEnter "ABC" and press .

bPress to turn off the automatic thread cutting ( ).

cPress (Back key).

fPress to turn it to .

XThe stitching starting point is set to lower left of the design.

gLower the presser foot, and then press (Start/stop switch) to begin sewing.

hWhen embroidering is finished, trim the thread leaving the end of the thread longer than usual. Then reset the fabric in the embroidery frame, in a position where you can sew "DEF".

ab

a Embroidery start position b Embroidery end position

iEnter "DEF" and press .

dPress .

jPress .

ePress .

kPress to turn it to .

XThe stitching starting point is set to lower left of the design.

146