Panasonic TH-L42U30T, TH-L42U30K, TH-L42U30X, TH-L42U30M Setup the wireless LAN connection

Setup the wireless LAN connection

Setup the wireless LAN connection to enable the network service functions. ●To setup the wireless LAN connection, a wireless LAN Adaptor is required.

●Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the manual of the access point.

●Please note that this TV does not support wireless public access points.

	1	Connect the Wireless LAN Adaptor to the USB 1 or 2 port
Tuning		Internet environment
		Access point		Wireless LAN Adaptor
Auto	2	Select [Yes].	No
		Yes
		Start wireless LAN connection setup?		select
		Please connect the wireless LAN adaptor to a USB terminal.
				confirm
	3	Select the connection type		select	●If your access point supports WPS
		Connection Type
		Please select network connection type.			(Push button), then select this option.
		WPS(Push button)		confirm	If not, select [Search for access point].
		Search for access point

■[WPS(Push button)]

WPS(Push button)	Press the WPS button on the access point until the light flashes.
point until its lightt flashes. .	And then, press the OK button to connect the Wireless LAN
1) Pleasepresspressthethe‘WPS’‘WPS’buttonbuttontheon theaccessaccess
2) Whenthelightisisflashingselectselect‘Connect’‘Connect’ on	Adaptor and the access point.
TV..
If youareunsure,pleasecheckcheckthetheinstruction
manualoftheacaccesspointpoint. .
Connect	●Ensure that your access point supports WPS for this method.

■ [Search for access point]			●WPS: Wi-Fi Protected Setup™
Access points found automatically are listed.
			1 Select your desired access point
Available Access Points
No.	SSID	Wireless type Encrypt Reception				Y
1	Access Point A	11n(2.4GHz)		select	●To search access points again
2	Access Point B	11n(5GHz)
3	Access Point C	11n(5GHz)
				access	●For the information of the INFO
					highlighted access point
Encryption Key Setting			2 Access the encryption key input mode

Connection will be made with the following settings:-

SSID : Access Point A

Authentication type : WPA-PSK

Encryption type : TKIP

W

PO

I

OPT

Ot

H

Fr

HO

Please input the encryption key.

Encryption key

Access Point Settings

Encryption key

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

0

1

2

3

4

5

6

7

8

9

!

:

#

a

b

c

d

e

f

g

h

i

j

k

l

m

n

o

p

q

r

s

t

u

v

w

x

y

z

(

)

+

-

.

*

_

Access Point Settings

Encryption key is set to:-

XXXXXXXX

Select ‘Yes’ to confirm.

Select ‘No’ to change.

●If the selected access point is not encrypted, the confirmation screen will be displayed. It is recommended to select the encrypted access point.

3 Enter the encryption key of the access point (Set characters one by one)

selectRETURN

Store set

●You can also set the characters by using the numeric buttons.

4 Select [Yes]

select set

●To re-enter the encryption key, select [No].

O

Tu

1D t

M

YesNo

Wireless LAN connection setup is completed

●If failed, check the encryption key, settings or positions of your access point. Read the manual of the access point.

●If connection to the access point is successful, we recommend you perform the

14[Connection Test] (p. 47).

TH_L42U30KMTX_EN.indd 14

3/21/2011 1:42:36 PM