3Com Router 5000/6000 Family

11

Command Reference

 

bridge-set stp enable

Use the bridge-set stp enable command to disable STP on the port.

Interface view

bridge-set stp port pathcost

Use the bridge-set stp port pathcost command to configure the path cost of the bridge port.

Interface view

bridge-set stp port priority

Use the bridge-set stp port priority command to configure the priority of the bridge port.

Interface view

bridge stp ieee

Use the bridge stp ieee command to specify a bridge set to support IEEE STP.

System view

bridge stp max-age

Use the bridge stp max-agecommand to set the Max Age timer on the bridge.

System view

bridge stp priority

Use the bridge stp priority command to assign a priority to the bridge.

System view

bridge stp timer forward-delay

Use the bridge stp timer forward-delaycommand to set the Forward Delay timer on the bridge.

System view

bridge stp timer hello

Use the bridge stp timer hello command to set the Hello Time timer on the bridge.

System view

bridge vlanid-transparent-transmit enable

Use the bridge vlanid-transparent-transmit enable command to enable VLAN ID transparent transmission.

Interface view

broadcast-limit link

Use the broadcast-limit link command to configure the maximum number of links that the virtual template supports for sending multicast or broadcast packets.

Virtual Template view

broadcast suppression

Use the broadcast-suppressioncommand to restrict the broadcast traffic size on the port.

Ethernet Port view

bsr-policy

Use the bsr-policycommand to restrict the range for valid BSR, preventing BSR spoofing.

PIM view

bump

Use the bump command to configure the standby PVC that will take over when a specified PVC goes down.

ATM Pvc-Group view

busytone-t-th

Use the busytone-t-thcommand to configure the threshold of busy tone detection.

FXO Voice Subscriber-Line view

bye

Use the bye command to disconnect from the remote FTP server and exit to user view.

FTP Client view

bye

Use the bye command to terminate the connection to the remote SFTP server and exit to system view as you would with the exit and quit commands.

SFTP Client view

c-bsr

Use the c-bsrcommand to configure a candidate BSR.

PIM view

c-rp

Use the c-rpcommand to configure the router to advertise itself as a candidate RP to BSR.

PIM view

Page 11
Image 11
3Com 5000/6000 Interface view, Virtual Template view, Ethernet Port view, PIM view, ATM Pvc-Group view, Sftp Client view