3Com 5000/6000 manual NetStream Aggregation view, BSV Interface view, MR view

66	3Com Router 5000/6000 Family
	Command Reference

em-phy-parm

Use the em-phy-parmcommand to configure a wire scheme for the analog E&M subscriber-line.

Voice Subscriber-Line view

em-signal

Use the em-signalcommand to configure a voice subscriber-line start mode.

Voice Subscriber-Line view

enable

Use the enable command to enable current aggregation mode.

NetStream Aggregation view

enable deactivate

Use the enable deactivate command to enable the router to actively deactivate the BSV interface.

BSV Interface view

enable snmp trap undown

Use the enable snmp trap updown command to enable the interface to send UPDOWN traps.

Interface view

encapsulation

Use the encapsulation gre command to set the MR encapsulation mode to GRE.

MR view

encapsulation

Use the encapsulation command to specify ATM AAL5 encapsulation type for PVC.

PVC view

encapsulation-mode

Use the encapsulation-modecommand to set the encapsulation mode that the security protocol applies to

IP packets, which can be transport or tunnel.

IPSec Proposal view

encrypt-card backuped

Use the encrypt-card backuped command to enable backup function for the encryption card.

System view

encrypt-cardfast-switch

Use the encrypt-cardfast-switchcommand to enable the fast forwarding function of the encryption card.

System view

encryption-algorithm

Use the encryption-algorithmcommand to specify the encryption algorithm for an IKE proposal.

IKE Proposal view

entity

Use the entity command to configure a voice entity and enter its view (at the same time specify the working mode related to voice).

Voice Dial Program view

error-diffusion restraint config

Use the error-diffusion restraint config command to set the three parameters for error diffusion restraint function.

System view

error-diffusion restraint enable

Use the error-diffusion restraint enable command to enable error diffusion restraint.

System view

escape-key

Use the escape-keycommand to define an escape key or key combination for aborting tasks.

User Interface view

esis

Use the esis command to employ ES-IS protocol globally and enter ES-IS view.

System view

esis enable

Use the esis enable command to employ ES-IS protocol on the interface.

Interface view

esp authentication-algorithm

Use the esp authentication-algorithmcommand to set the authentication algorithm used by ESP.

IPSec Proposal view