3Com 5000/6000 manual Display isdn parameters

3Com Router 5000/6000 Family	49
Command Reference

display isdn parameters

Use the display isdn parameters command to view the system parameters at layers 2 and 3 of the ISDN protocol, such as the durations of system timers and frame size.

Any view

display isdn spid

Use the display isdn spid command to view information on SPID on the BRI interface encapsulated with the NI protocol.

Any view

display isis brief

Use the display isis brief command to view the brief information of IS-IS.

Any view

display isis interface

Use the display isis interface command to view the information of the IS-IS enabled interface.

Any view

display isis lsdb

Use the display isis lsdb command to view the link state database of the IS-IS.

Any view

display isis mesh-group

Use the display isis mesh-groupcommand to view the IS-IS mesh group.

Any view

display isis peer

Use the display isis peer command to view IS-IS peer information.

Any view

display isis routing

Use the display isis routing command to view IS-IS routing information

Any view

display isis routing clns

Use the display isis routing clns command to display CLNS routing information generated by IS-IS protocol.

Any view

display isis spf-log

Use the display isis spf-logcommand to view the SPF calculation log of the IS-IS.

Any view

display llc2

Use the display llc2 command to view statistical information of LLC2.

Any view

display loadsharing ip address

Use the display loadsharing ip address command to view the statistics about the unbalanced load sharing based on interface bandwidth, including the number and ratio of the packets sent from the interfaces related to the equal-cost routes to a network address.

Any view

display local-server statistics

Use the display local-server statistics command to display statistics of the local RADIUS authentication server.

Any view

display local-user

Use the display local-usercommand to view the relevant information on the specified local user or all the local users. The output can help you troubleshoot faults related to local user.

Any view

display log startup

Use the display log startup command to display the state of the configuration restoration log switch.

User view

display logbuffer

Use the display logbuffer command to view the information recorded in the log buffer.

Any view

display logbuffer summary

Use the display logbuffer summary command to display a summary about the log buffer on the router.

Any view