
3Com Router 5000/6000 Family | 141 |
Command Reference |
|
sot
Use the sot
Synchronous Serial Interface view
sot
Use the sot
Synchronous Serial Interface view
sot send address
Use the sot send address command to configure the route for sending SDLC frames to the specified specific terminal.
Synchronous Serial Interface view
sot send all tcp
Use the send all tcp command to forward all received SDLC frames to the specified address.
Synchronous Serial Interface view
sot timer keepalive
Use the sot timer keepalive command to configure the keepalive timer.
System view
source
Use the tunnel source command to specify the source IP address or source interface to be filled in the added IP header at the time of tunnel interface encapsulation.
Tunnel Interface view
Use the
HWPing Test Group view
Use the
HWPing Test Group view
Use the
SIP Client view
Use the
PIM view
Use the
HWPing Test Group view
Use the
R2 CAS view
Use the
Voice Dial Program view
speed
Use the speed command to set the operating speed of the Ethernet interface.
Ethernet Interface view
speed
Use the speed command to configure the rate of the port.
Ethernet Port view
speed
Use the speed command to set the transmission rate on the user interface.
User Interface view
Use the