68 | 3Com Router 5000/6000 Family |
| Command Reference |
fe1 detect-ais(E1-F interface)
Use the fe1 detect-aiscommand to enable alarm indication signal (AIS) detect on the E1-F interface.
fe1 frame-format
Use the fe1 frame-formatcommand to configure the framing format of the E1-F interface.
fe1 loopback
Use the fe1 loopback command to place the E1-F interface in local or remote loopback.
fe1 timeslot-list
Use the fe1 timeslot-listcommand to bundle timeslots on the E1-F interface.
fe1 unframed
Use the fe1 unframed command to configure an E1-F interface to work in unframed mode.
feac (CT3 Interface)
Use the feac command to enable FEAC channel signal detection and sending on the CT3 interface.
fifo queue-length
Use the fifo queue-lengthcommand to set the FIFO queue length of frame relay virtual circuit.
file prompt
Use the file prompt command to enable or disable the router to warn when an operation may result in data loss or corruption.
filename
Use the filename command to configure the name of the file to be gotten from or put onto an FTP server.
filter-policy
Use the filter-policy export command to configure the filtering conditions of the routing information advertised by a certain type of routing protocols.
filter-policy export
Use the filter-policy export command to filter the advertised routes and only the routes passing the filter can be advertised by BGP.
BGP Unicast view
BGP Multicast view
VPNv4 view
VPN Instance view
filter-policy export
Use the filter-policy export command to configure IS-IS to filter all redistributed routes or routes redistributed from a specified routing protocol.
filter-policy export
Use the filter-policy export command to configure OSPF to filter the LSAs of redistributed routes for advertisement.
filter-policy export
Use the filter-policy export command to configure to filter the advertised routing information by RIP.
filter-policy gateway
Use the filter-policy gateway import command to filter the routing information advertised by a specified router.
Use the filter-policy import command to configure the condition for filtering the routing information.
Routing Protocol view
