30 | 3Com Router 5000/6000 Family |
| Command Reference |
Use the
HWPing Test Group view
Use the
HWPing Test Group view
detect
Use the detect command to specify ASPF policy for application layer protocols.
ASPF Policy view
detect
Use the detect command to enable data carrier detection as well as level detection on a serial interface.
Asynchronous Serial Interface view
Synchronous Serial Interface view,
Use the
CE1/PRI Interface view
detect group
Use the
System view
detect list
Use the
Detect Group view
dh
Use the dh command to select the
IKE Proposal view
dhcp accounting domain (Interface view)
Use the dhcp server accounting domain command to enable DHCP accounting for addresses from the interface address pool and configure a domain for DHCP accounting.
Interface view
dhcp enable
Use the dhcp enable command to enable DHCP.
System view
dhcp relay information
Use the dhcp relay information enable command to enable the DHCP relay to support option 82 globally.
System view
dhcp relay information strategy
Use the dhcp relay information strategy command to configure a strategy for handling packets with option 82 on the DHCP relay.
System view
dhcp relay release
Use the dhcp relay release command to send an IP address releasing request to a DHCP server via the
DHCP relay.
Interface view
System view
dchp select (Interface view)
Use the dhcp select command in Interface view to select a method for disposing the DHCP packets destined to the local device.
Interface view
dchp select (System view)
Use the dhcp select command in System view to select a method for multiple interfaces in a specified range to dispose the DHCP packets destined to the local device.
System view
dhcp server accounting domain interface (System view)
Use the dhcp server accounting domain interface command to enable DHCP accounting for addresses from the address pools of the specified interfaces and configure a domain for DHCP accounting.
