3Com manual 3Com Router 5000/6000 Family 135 Command Reference, Radius view

3Com Router 5000/6000 Family	135
Command Reference

sdlc window

Use the sdlc window command to configure the length of the SDLC local response window.

Synchronous Serial Interface view

sdlc xid

Use the sdlc xid command to configure the XID of the SDLC.

Synchronous Serial Interface view

secondary accounting

Use the secondary accounting command to configure the IP address and port number for the secondary

RADIUS accounting server.

RADIUS view

secondary accounting

Use the secondary accounting command to configure a secondary TACACS accounting server.

TACACS+ view

secondary authentication

Use the secondary authentication command to configure the IP address and port number of the secondary RADIUS authentication/authorization/accounting server.

RADIUS view

secondary authentication

Use the secondary authentication command to configure a secondary TACACS authentication server.

TACACS+ view

secondary authorization

Use the secondary authorization command to configure a secondary TACACS authorization server.

TACACS+ view

security acl

Use the security acl command to set an access control list to be used by the ipsec policy and specify the data stream protection mode.

IPSec Policy view

IPSec Policy Template view

security-policy-server

Use the security-policy-servercommand to specify the IP address of a security policy server.

RADIUS Scheme view

seizure-ack

Use the seizure-ackcommand to enable or disable the terminating point to send seizure acknowledgement signal.

R2 CAS view

select-mode

Use the select-modecommand to configure the E1 trunk selection mode.

R2 CAS view

select-rulesearch-stop

Use the select-rulesearch-stopcommand to configure the maximum number of voice entities found.

Voice Dial Program view

select-ruletype-first

Use the select-ruletype-firstcommand to configure the type-first select rules for voice entities.

Voice Dial Program view

select-rulerule-order

Use the select-rulerule-ordercommand to configure the select rule of voice entities.

Voice Dial Program view

select-stop

Use the select-stopcommand to disable the search for voice entities.

Voice Entity view

send

Use the send command to transfer messages between user interfaces. Use the send all command to send messages to all user interfaces.

Use the send number command to send messages to the user interface specified by its absolute index.

Use the send type-name number command to send messages to the user interface specified by its interface type and relative index.

User view