104 | 3Com Router 5000/6000 Family |
| Command Reference |
network-entity
Use the network-entitycommand to configure the name of Network Entity Title (NET) of the IS-IS routing process.
normal-connectslow-h245
Use the normal-connectslow-h245command to configure disabling the calling end from actively initiating an H245 connection request to the called end before the called end is hooked off in voice entity view.
Use the normal-connectslow-h245command to disable the calling end from actively initiating an H245 connection request to the called end before the called end is hooked off in voice entity view.
nslookup type
Use the nslookup type command to resolve the specified IP address or domain name to a domain name or IP address.
nssa
Use the nssa command to configure an area as NSSA area.
ntp-service access
Use the ntp-service access command to control access to the NTP service on the local device.
ntp-service authentication enable
Use the ntp-service authentication enable command to enable NTP service ID authentication.
ntp-serviceauthentication-keyid
Use the ntp-serviceauthentication-keyidcommand to set an NTP authentication key.
ntp-servicebroadcast-client
Use the ntp-servicebroadcast-clientcommand to configure NTP broadcast client mode.
ntp-servicebroadcast-server
Use the ntp-servicebroadcast-servercommand to configure NTP broadcast server mode.
ntp-servicemax-dynamic-sessions
Use the ntp-servicemax-dynamic-sessionscommand to set the number of sessions allowed by the local device.
ntp-servicemulticast-client
Use the ntp-servicemulticast-clientcommand to configure NTP multicast client mode.
ntp-servicemulticast-server
Use the ntp-servicemulticast-servercommand to configure NTP multicast server mode.
ntp-servicerefclock-master
Use the ntp-servicerefclock-mastercommand to set the local clock as the NTP master clock to provide synchronization source.
ntp-service reliable authentication-keyid
Use the ntp-service reliable authentication-keyidcommand to specify a reliable key.
ntp-servicesource-interface
Use the ntp-servicesource-interfacecommand to specify an interface for the local end to transmit NTP messages.
ntp-serviceunicast-peer
Use the ntp-serviceunicast-peercommand to configure NTP peer mode.
ntp-serviceunicast-server
Use the ntp-serviceunicast-servercommand to configure NTP server mode.
