![](/images/new-backgrounds/1299218/299218267x1.webp)
134 | 3Com Router 5000/6000 Family |
| Command Reference |
script trigger init
Use the script trigger init command to configure the Modem script that will be executed when the system is powered on or rebooted.
User Interface view
script trigger login
Use the script trigger login command to configure the Modem script that will be executed when an outgoing call connection is successfully established.
User Interface view
script trigger logout
Use the script trigger logout command to configure the Modem script that is executed when a link is reset.
User-interface view
sdlc controller
Use the sdlc controller command to configure the secondary station address of the SDLC.
Synchronous Serial Interface view
sdlc
Use the sdlc
Synchronous Serial Interface view
sdlc
Use the sdlc
Synchronous Serial Interface view
sdlc
Use the sdlc
Synchronous Serial Interface view
sdlc
Use the sdlc
Synchronous Serial Interface view
sdlc
Use the sdlc
Synchronous Serial Interface view
sdlc modulo
Use the sdlc modulo command to configure the modulus of the SDLC.
Synchronous Serial Interface view
sdlc
Use the sdlc
LLC2.
Synchronous Serial Interface view
sdlc
Use the sdlc
Synchronous Serial Interface view
sdlc simultaneous
Use the sdlc simultaneous command to configure the SDLC data to use the bidirectional transmission mode.
Synchronous Serial Interface view
sdlc status
Use the sdlc role command to configure the SDLC role the device acts.
Synchronous Serial Interface view
sdlc timer ack
Use the sdlc timer ack command to configure the SDLC primary station response waiting time
(mseconds).
Synchronous Serial Interface view
sdlc timer lifetime
Use the sdlc timer lifetime command to configure the SDLC secondary station response waiting time
(mseconds).
Synchronous Serial Interface view
sdlc timer poll
Use the sdlc timer poll command to configure the SDLC poll pause timer.