3Com manual 283Com Router 5000/6000 Family Command Reference

283Com Router 5000/6000 Family Command Reference

default entity modem compatible-param

Use the default entity modem compatible-paramcommand in the case that you fail to use standard

Modem PCM to interoperate with devices from other vendors.

Voice Dial Program view

default entity modem protocol

Use the default entity modem protocol none command to globally disable Modem function of voice entity.

Use the default entity modem protocol pcm command to globally configure PCM Modem protocol type of voice entity, including coding/decoding and Modem negotiation mode.

Voice Dial Program view

default entity normal-connectslow-h245

Use the default entity normal-connectslow-h245command to globally disable the calling end from actively initiating an H245 connection request to the called end before the called end is hooked off.

Use the default entity normal-connectslow-h245command to default to globally disable the calling end from actively initiating the H245 connection request to the called end before the called end is hooked off. In this case, all newly created voice entities and voice entities which have not been configured with this function will inherit this configuration.

Voice Dial Program view

default entity payload-size

Use the default entity payload-sizecommand to configure the default time length of voice packets with different coding formats.

Voice Dial Program view

default entity service data

Use the default entity service data command to globally configure enabling data call service.

Voice dial program view

default entity vad-on

Use the default entity vad-oncommand to globally configure enabling silence detection as the default value.

Voice Dial Program view

default interval

Use the default interval command to configure the default interval for OSPF to redistribute external routes.

OSPF view

default limit

Use the default limit command to configure default value of maximum number of redistributed routes.

OSPF view

default local-preference

Use the default local-preferencecommand to configure the local preference.

BGP Unicast view

BGP Multicast view

VPNv4 view

default med

Use the default med command to configure the system MED value.

BGP Unicast view

BGP Multicast view

VPNv4 view

VPN Instance view

default-route-advertise

Use the default-route-advertisecommand to configure the default route of Level-1 and Level-2 routers.

IS-IS view

default-route-advertise

Use the default-route-advertisecommand to make the system generate a default route to OSPF area.

Use the default-route-advertisecommand at ABR to generate a default route which is advertised via the Type-5 LSA or Type-7 LSA no matter whether there is a default route in the routing table.

OSPF view

default-route imported

Use the default-route imported command to redistribute local default routes into BGP.

BGP view