
86 | 3Com Router 5000/6000 Family |
| Command Reference |
ip netstream timeout inactive
Use the ip netstream timeout inactive command to set the inactive aging timer for NetStream cache entries.
System view
ip option
Use the ip option
System view
ip policy
Use the ip policy
Interface view
ip pool
Use the ip pool command to configure a local address pool for assigning addresses to PPP users.
System view
ISP Domain view
Use the
ATM PVC-Group view
ip relay address cycle
Use the ip relay address cycle command to enable the DHCP relay to allocate servers using the load sharing approach, where the HASH algorithm applies allowing different clients to use different DHCP servers and the same client to use the same DHCP server so long as it is possible.
System view
ip relay address (Interface view)
Use the ip relay address command to specify the exact location of a DHCP server by configuring an IP relay address for it on the current interface.
Interface view
ip relay address interface (System view)
Use the ip relay address interface command to configure a relay address for the Ethernet interfaces in a specified range for the purpose of transparent forwarding.
System view
ip
Use the ip
Use the ip
System view
ip
Use the ip
System view
ip
Use the ip
System view
ip
Use the ip
System view
ip
Use the ip
System view
ip
Use the ip
System view
ip tcp vjcompress
Use the ip tcp vjcompress command to enable a PPP interface to compress the VJ TCP header.
Interface view
ip urpf
Use the ip urpf command to enable URPF check on the interface.