154 | 3Com Router 5000/6000 Family |
| Command Reference |
using (CT3 Interface)
Use the using command to configure the operating mode of a CT3 interface.
vad-on
Use the vad-oncommand to enable silence detection function.
Voice Entity view
validate source address
Use the validate-source-addresscommand to enable checking of the source address of a RIP packet upon reception.
RIP MBGP Address Family view
verbose
Use the verbose command to enable the verbose function to view information from the FTP server.
vfs check check-method discard
Use the vfs check check-method discard command to specify the file discarding method to be the file system check method.
vfs check check-method discard auto
Use the vfs check check-method discard auto command to specify to discard the contents of corrupted files and then recycle the corresponding storage space automatically.
vfs check check-method fix
Use the vfs check check-method fix command to set the file check method to automatic file fixing.
vfs check file-system
Use the vfs check file-systemcommand to check the file system. At present, the system can check corrupted files and perform operations such as file fixing/discarding and space recycling.
vi-cardbusy-tone-detect
Use the vi-cardbusy-tone-detectcommand to configure busy tone detection method on FXO subscriber-line.
Voice view
vi-cardcptone-custom
Use the vi-cardcptone-customcommand to set the prompt tone parameters of the system.
Voice view
vi-cardcustom-toneparam
Use the vi-cardcustom-toneparamcommand to save DSP parameters and customize busy tone detection parameters on the FXO interface.
Voice view
vi-card reboot
Use the vi-card reboot command to reboot a voice card.
Voice view
virtualbaudrate
Use the virtualbaudrate command to set a virtual baudrate for the DTE interface.
vlan-type dot1q vid
Use the vlan-type dot1q command to set the encapsulation types on the sub-interface.
vlink-peer
Use the vlink-peercommand to create and configure a virtual link.
vofr
Use the vofr command to enable VoFR operation mode for a DLCI.
vofr frf11-timer
Use the vofr frf11-timercommand to configure the interval of Trunk Wait timer in FRF.11 trunk mode.
Voice view
