3Com manual 3Com Router 5000/6000 Family 121 Command Reference, Voice GK Client view

3Com Router 5000/6000 Family	121
Command Reference

radius scheme

Use the radius scheme command to configure a RADIUS scheme and enter its view.

System view

radius trap

Use the radius trap command to enable the RADIUS server to send traps when it goes down.

System view

ras-on

Use the ras-oncommand to enable the GK Client function.

Voice GK Client view

re-answer

Use the re-answercommand to enable or disable the originating point to support re-answer signal process.

R2 CAS view

re-authentication

Use the re-authenticationcommand to enable console login re-authentication.

User Interface view

reboot

Use the reboot command to have the router reboot.

User view

receive gain

Use the receive gain command to configure the gain value at the voice subscriber-line input end.

Voice Subscriber-Line view

redialtimes

Use the redialtimes command to configure the number of times of dialing in each dialing phase for a certain access service number.

Voice Access-Number view

redirect bind vpn-instance

Use the redirect bind vpn-instancecommand to bind a VPN instance to the user interface.

User Interface view

redirect disconnect

Use the redirect disconnect command to disconnect a redirected telnet connection manually.

User Interface view

redirect enable

Use the redirect enable command to enable redirect on the asynchronous serial interface.

User Interface view

redirect listen-port

Use the redirect listen-portcommand to specify a port to listen for redirected Telnet connections.

User Interface view

redirect refuse-negotiation

Use the redirect refuse-negotiationcommand to disable Telnet option negotiation during setup of redirected Telnet connection.

User Interface view

redirect return-dealfrom-telnet

Use the redirect return-dealfrom-telnetcommand to have the router that redirects Telnet connection substitute 0x0d for 0x0d 0x0a and 0x0d 0x00, the carriage returns received from the Telnet client.

User Interface view

redirect return-dealfrom-terminal

Use the redirect return-dealfrom-terminalcommand to have the router that redirects Telnet connection substitute 0x0d for 0x0d 0x0a and 0x0d 0x00, the carriage returns received from the terminal (a PC connected to the console port for example).

User Interface view

redirect timeout

Use the redirect timeout command to specify the amount of time that a redirected Telnet connection can stay idle. After that, the connection is disconnected.

User Interface view

reflect between-clients

Use the reflect between-clientscommand to enable route reflection between clients.

BGP view

VPNv4 view

VPN Instance view