3Com Router 5000/6000 Family | 119 |
Command Reference |
|
queue wfq
Use the queue wfq command to configure the
Traffic Behavior view
quit
Use the quit command to return from current view to lower level view, or exit the system if current view is user view.
Any view
quit
Use the quit command to disconnect from the remote FTP server and exit to user view.
FTP Client view
quit
Use the quit command to terminate the connection to the remote SFTP server and exit to system view as you would with the bye and exit commands.
SFTP Client view
quit
Use the quit command to terminate the connection to the remote SSH server.
User view
qos apply policy
Use the qos apply policy command to apply a service policy to the interface.
Interface view
qos car
Use the qos car command to implement TP policy on an interface.
Interface view
qos carl
Use the qos carl command to establish or modify a CARL.
System view
qos cq
Use the qos cq cql command to apply the customized queue to an interface.
Interface view
qos cql
Use the qos cql
System view
qos cql
Use the qos cql
System view
qos cql protocol
Use the qos cql protocol command to establish classification rules based on the protocol type.
System view
qos cql protocol mpls exp
Use the qos cql protocol mpls exp command to configure classification rule based on the MPLS protocol.
System view
qos cql queue
Use the qos cql queue command to configure the length of a queue, namely, the number of packets a queue can hold.
System view
qos cql queue serving
Use the qos cql queue serving command to set the
System view
qos fifo
Use the qos fifo
Interface view
qos gts
Use the qos gts command to set shaping parameters for all or a specified type of traffic and perform traffic shaping.
